The RewriteEngine directive enables or disables the runtime rewriting engine. If it is set to off this module does no runtime processing at all. It does not even update the SCRIPT_URx environment variables.

Use this directive to disable the module instead of commenting out all the RewriteRule directives!

Note that rewrite configurations are not inherited by virtual hosts. This means that you need to have a RewriteEngine on directive for each virtual host in which you wish to use rewrite rules.

RewriteMap directives of the type prg are not started during server initialization if they're defined in a context that does not have RewriteEngine set to on

The RewriteOptions directive sets some special options for the current per-server or per-directory configuration. The Option string can currently only be one of the following:

inherit

This forces the current configuration to inherit the configuration of the parent. In per-virtual-server context, this means that the maps, conditions and rules of the main server are inherited. In per-directory context this means that conditions and rules of the parent directory's .htaccess configuration are inherited.

Rules inherited from the parent scope are applied after rules specified in the child scope.

AllowAnyURI

When RewriteRule is used in VirtualHost or server context with version 2.2.23 or later of httpd, mod_rewrite will only process the rewrite rules if the request URI is a URL-path. This avoids some security issues where particular rules could allow "surprising" pattern expansions (see CVE-2011-3368 and CVE-2011-4317). To lift the restriction on matching a URL-path, the AllowAnyURI option can be enabled, and mod_rewrite will apply the rule set to any request URI string, regardless of whether that string matches the URL-path grammar required by the HTTP specification.

Enabling this option will make the server vulnerable to security issues if used with rewrite rules which are not carefully authored. It is strongly recommended that this option is not used. In particular, beware of input strings containing the '@' character which could change the interpretation of the transformed URI, as per the above CVE names.

MergeBase

With this option, the value of RewriteBase is copied from where it's explicitly defined into any sub-directory or sub-location that doesn't define its own RewriteBase. Not copying was the default until 2.2.22. In version 2.2.23 copying was the default. The flag to explicitly control it is available for Apache HTTP Server 2.2.24 and later.

The RewriteLog directive sets the name of the file to which the server logs any rewriting actions it performs. If the name does not begin with a slash ('/') then it is assumed to be relative to the Server Root. The directive should occur only once per server config.

The RewriteLog log file format is as follows:

The RewriteLogLevel directive sets the verbosity level of the rewriting logfile. The default level 0 means no logging, while 9 or more means that practically all actions are logged.

To disable the logging of rewriting actions simply set Level to 0. This disables all rewrite action logs.

This directive sets the filename for a synchronization lockfile which mod_rewrite needs to communicate with RewriteMap programs. Set this lockfile to a local path (not on a NFS-mounted device) when you want to use a rewriting map-program. It is not required for other types of rewriting maps.

The RewriteMap directive defines a Rewriting Map which can be used inside rule substitution strings by the mapping-functions to insert/substitute fields through a key lookup. The source of this lookup can be of various types.

The MapName is the name of the map and will be used to specify a mapping-function for the substitution strings of a rewriting rule via one of the following constructs:

${ MapName : LookupKey }
${ MapName : LookupKey | DefaultValue }

When such a construct occurs, the map MapName is consulted and the key LookupKey is looked-up. If the key is found, the map-function construct is substituted by SubstValue. If the key is not found then it is substituted by DefaultValue or by the empty string if no DefaultValue was specified. Empty values behave as if the key was absent, therefore it is not possible to distinguish between empty-valued keys and absent keys.

For example, you might define a RewriteMap as:

You would then be able to use this map in a RewriteRule as follows:

The following combinations for MapType and MapSource can be used:

• Standard Plain Text
  MapType: txt, MapSource: Unix filesystem path to valid regular file

  This is the standard rewriting map feature where the MapSource is a plain ASCII file containing either blank lines, comment lines (starting with a '#' character) or pairs like the following - one per line.

  MatchingKey SubstValue

  ##
  ##  map.txt -- rewriting map
  ##
  
  Ralf.S.Engelschall    rse   # Bastard Operator From Hell
  Mr.Joe.Average        joe   # Mr. Average
  

  RewriteMap real-to-user txt:/path/to/file/map.txt
• Randomized Plain Text
  MapType: rnd, MapSource: Unix filesystem path to valid regular file

  This is identical to the Standard Plain Text variant above but with a special post-processing feature: After looking up a value it is parsed according to contained ``|'' characters which have the meaning of ``or''. In other words they indicate a set of alternatives from which the actual returned value is chosen randomly. For example, you might use the following map file and directives to provide a random load balancing between several back-end servers, via a reverse-proxy. Images are sent to one of the servers in the 'static' pool, while everything else is sent to one of the 'dynamic' pool.

  Example:

  ##
  ##  map.txt -- rewriting map
  ##
  
  static   www1|www2|www3|www4
  dynamic  www5|www6
  

  RewriteMap servers rnd:/path/to/file/map.txt
  
  RewriteRule ^/(.*\.(png|gif|jpg)) http://${servers:static}/$1 [NC,P,L]
  RewriteRule ^/(.*) http://${servers:dynamic}/$1 [P,L]
• Hash File
  MapType: dbm[=type], MapSource: Unix filesystem path to valid regular file

  Here the source is a binary format DBM file containing the same contents as a Plain Text format file, but in a special representation which is optimized for really fast lookups. The type can be sdbm, gdbm, ndbm, or db depending on compile-time settings. If the type is omitted, the compile-time default will be chosen.

  To create a dbm file from a source text file, use the httxt2dbm utility.

  $ httxt2dbm -i mapfile.txt -o mapfile.map
• Internal Function
  MapType: int, MapSource: Internal Apache function

  Here, the source is an internal Apache function. Module authors can provide additional internal functions by registering them with the ap_register_rewrite_mapfunc API. The functions that are provided by default are:

  • toupper:
    Converts the key to all upper case.
  • tolower:
    Converts the key to all lower case.
  • escape:
    Translates special characters in the key to hex-encodings.
  • unescape:
    Translates hex-encodings in the key back to special characters.
• External Rewriting Program
  MapType: prg, MapSource: Unix filesystem path to valid regular file

  Here the source is a program, not a map file. To create it you can use a language of your choice, but the result has to be an executable program (either object-code or a script with the magic cookie trick '#!/path/to/interpreter' as the first line).

  This program is started once, when the Apache server is started, and then communicates with the rewriting engine via its stdin and stdout file-handles. For each map-function lookup it will receive the key to lookup as a newline-terminated string on stdin. It then has to give back the looked-up value as a newline-terminated string on stdout or the four-character string ``NULL'' if it fails (i.e., there is no corresponding value for the given key). A trivial program which will implement a 1:1 map (i.e., key == value) could be:

  External rewriting programs are not started if they're defined in a context that does not have RewriteEngine set to on

  .

  #!/usr/bin/perl
  $| = 1;
  while (<STDIN>) {
      # ...put here any transformations or lookups...
      print $_;
  }
  

  But be very careful:

  1. ``Keep it simple, stupid'' (KISS). If this program hangs, it will cause Apache to hang when trying to use the relevant rewrite rule.
  2. A common mistake is to use buffered I/O on stdout. Avoid this, as it will cause a deadloop! ``$|=1'' is used above, to prevent this.
  3. The RewriteLock directive can be used to define a lockfile which mod_rewrite can use to synchronize communication with the mapping program. By default no such synchronization takes place.

The RewriteMap directive can occur more than once. For each mapping-function use one RewriteMap directive to declare its rewriting mapfile. While you cannot declare a map in per-directory context it is of course possible to use this map in per-directory context.

The RewriteBase directive specifies the URL prefix to be used for per-directory (htaccess) RewriteRule directives that substitute a relative path.

This directive is required when you use a relative path in a substitution in per-directory (htaccess) context unless either of the following conditions are true:

• The original request, and the substitution, are underneath the DocumentRoot (as opposed to reachable by other means, such as Alias).
• The filesystem path to the directory containing the RewriteRule, suffixed by the relative substitution is also valid as a URL path on the server (this is rare).

In the example below, RewriteBase is necessary to avoid rewriting to http://example.com/opt/myapp-1.2.3/welcome.html since the resource was not relative to the document root. This misconfiguration would normally cause the server to look for an "opt" directory under the document root.

DocumentRoot /var/www/example.com
Alias /myapp /opt/myapp-1.2.3
<Directory /opt/myapp-1.2.3>
RewriteEngine On
RewriteBase /myapp/
RewriteRule ^index\.html$  welcome.html 
</Directory>

The RewriteCond directive defines a rule condition. One or more RewriteCond can precede a RewriteRule directive. The following rule is then only used if both the current state of the URI matches its pattern, and if these conditions are met.

TestString is a string which can contain the following expanded constructs in addition to plain text:

• RewriteRule backreferences: These are backreferences of the form $N (0 <= N <= 9), which provide access to the grouped parts (in parentheses) of the pattern, from the RewriteRule which is subject to the current set of RewriteCond conditions..
• RewriteCond backreferences: These are backreferences of the form %N (1 <= N <= 9), which provide access to the grouped parts (again, in parentheses) of the pattern, from the last matched RewriteCond in the current set of conditions.
• RewriteMap expansions: These are expansions of the form ${mapname:key|default}. See the documentation for RewriteMap for more details.
• Server-Variables: These are variables of the form %{ NAME_OF_VARIABLE } where NAME_OF_VARIABLE can be a string taken from the following list:

  HTTP headers:	connection & request:
  HTTP_USER_AGENT HTTP_REFERER HTTP_COOKIE HTTP_FORWARDED HTTP_HOST HTTP_PROXY_CONNECTION HTTP_ACCEPT	REMOTE_ADDR REMOTE_HOST REMOTE_PORT REMOTE_USER REMOTE_IDENT REQUEST_METHOD SCRIPT_FILENAME PATH_INFO QUERY_STRING AUTH_TYPE
  server internals:	date and time:	specials:
  DOCUMENT_ROOT SERVER_ADMIN SERVER_NAME SERVER_ADDR SERVER_PORT SERVER_PROTOCOL SERVER_SOFTWARE	TIME_YEAR TIME_MON TIME_DAY TIME_HOUR TIME_MIN TIME_SEC TIME_WDAY TIME	API_VERSION THE_REQUEST REQUEST_URI REQUEST_FILENAME IS_SUBREQ HTTPS

  These variables all correspond to the similarly named HTTP MIME-headers, C variables of the Apache server or struct tm fields of the Unix system. Most are documented elsewhere in the Manual or in the CGI specification.

  SERVER_NAME and SERVER_PORT depend on the values of UseCanonicalName and UseCanonicalPhysicalPort respectively.

  Those that are special to mod_rewrite include those below.

  IS_SUBREQ

  Will contain the text "true" if the request currently being processed is a sub-request, "false" otherwise. Sub-requests may be generated by modules that need to resolve additional files or URIs in order to complete their tasks.

  API_VERSION

  This is the version of the Apache module API (the internal interface between server and module) in the current httpd build, as defined in include/ap_mmn.h. The module API version corresponds to the version of Apache in use (in the release version of Apache 1.3.14, for instance, it is 19990320:10), but is mainly of interest to module authors.

  THE_REQUEST

  The full HTTP request line sent by the browser to the server (e.g., "GET /index.html HTTP/1.1"). This does not include any additional headers sent by the browser. This value has not been unescaped (decoded), unlike most other variables below.

  REQUEST_URI

  The path component of the requested URI, such as "/index.html". This notably excludes the query string which is available as as its own variable named QUERY_STRING.

  REQUEST_FILENAME

  The full local filesystem path to the file or script matching the request, if this has already been determined by the server at the time REQUEST_FILENAME is referenced. Otherwise, such as when used in virtual host context, the same value as REQUEST_URI.

  HTTPS

  Will contain the text "on" if the connection is using SSL/TLS, or "off" otherwise. (This variable can be safely used regardless of whether or not mod_ssl is loaded).

Other things you should be aware of:

1. The variables SCRIPT_FILENAME and REQUEST_FILENAME contain the same value - the value of the filename field of the internal request_rec structure of the Apache server. The first name is the commonly known CGI variable name while the second is the appropriate counterpart of REQUEST_URI (which contains the value of the uri field of request_rec).

   If a substitution occurred and the rewriting continues, the value of both variables will be updated accordingly.

   If used in per-server context (i.e., before the request is mapped to the filesystem) SCRIPT_FILENAME and REQUEST_FILENAME cannot contain the full local filesystem path since the path is unknown at this stage of processing. Both variables will initially contain the value of REQUEST_URI in that case. In order to obtain the full local filesystem path of the request in per-server context, use an URL-based look-ahead %{LA-U:REQUEST_FILENAME} to determine the final value of REQUEST_FILENAME.

2. %{ENV:variable}, where variable can be any environment variable, is also available. This is looked-up via internal Apache structures and (if not found there) via getenv() from the Apache server process.
3. %{SSL:variable}, where variable is the name of an SSL environment variable, can be used whether or not mod_ssl is loaded, but will always expand to the empty string if it is not. Example: %{SSL:SSL_CIPHER_USEKEYSIZE} may expand to 128.
4. %{HTTP:header}, where header can be any HTTP MIME-header name, can always be used to obtain the value of a header sent in the HTTP request. Example: %{HTTP:Proxy-Connection} is the value of the HTTP header ``Proxy-Connection:''.

   If a HTTP header is used in a condition this header is added to the Vary header of the response in case the condition evaluates to to true for the request. It is not added if the condition evaluates to false for the request. Adding the HTTP header to the Vary header of the response is needed for proper caching.

   It has to be kept in mind that conditions follow a short circuit logic in the case of the 'ornext|OR' flag so that certain conditions might not be evaluated at all.

5. %{LA-U:variable} can be used for look-aheads which perform an internal (URL-based) sub-request to determine the final value of variable. This can be used to access variable for rewriting which is not available at the current stage, but will be set in a later phase.

   For instance, to rewrite according to the REMOTE_USER variable from within the per-server context (httpd.conf file) you must use %{LA-U:REMOTE_USER} - this variable is set by the authorization phases, which come after the URL translation phase (during which mod_rewrite operates).

   On the other hand, because mod_rewrite implements its per-directory context (.htaccess file) via the Fixup phase of the API and because the authorization phases come before this phase, you just can use %{REMOTE_USER} in that context.

6. %{LA-F:variable} can be used to perform an internal (filename-based) sub-request, to determine the final value of variable. Most of the time, this is the same as LA-U above.

CondPattern is the condition pattern, a regular expression which is applied to the current instance of the TestString. TestString is first evaluated, before being matched against CondPattern.

Remember: CondPattern is a perl compatible regular expression with some additions:

1. You can prefix the pattern string with a '!' character (exclamation mark) to specify a non-matching pattern.
2. There are some special variants of CondPatterns. Instead of real regular expression strings you can also use one of the following:
   • '<CondPattern' (lexicographically precedes)
     Treats the CondPattern as a plain string and compares it lexicographically to TestString. True if TestString lexicographically precedes CondPattern.
   • '>CondPattern' (lexicographically follows)
     Treats the CondPattern as a plain string and compares it lexicographically to TestString. True if TestString lexicographically follows CondPattern.
   • '=CondPattern' (lexicographically equal)
     Treats the CondPattern as a plain string and compares it lexicographically to TestString. True if TestString is lexicographically equal to CondPattern (the two strings are exactly equal, character for character). If CondPattern is "" (two quotation marks) this compares TestString to the empty string.
   • '-d' (is directory)
     Treats the TestString as a pathname and tests whether or not it exists, and is a directory.
   • '-f' (is regular file)
     Treats the TestString as a pathname and tests whether or not it exists, and is a regular file.
   • '-s' (is regular file, with size)
     Treats the TestString as a pathname and tests whether or not it exists, and is a regular file with size greater than zero.
   • '-l' (is symbolic link)
     Treats the TestString as a pathname and tests whether or not it exists, and is a symbolic link.
   • '-x' (has executable permissions)
     Treats the TestString as a pathname and tests whether or not it exists, and has executable permissions. These permissions are determined according to the underlying OS.
   • '-F' (is existing file, via subrequest)
     Checks whether or not TestString is a valid file, accessible via all the server's currently-configured access controls for that path. This uses an internal subrequest to do the check, so use it with care - it can impact your server's performance!
   • '-U' (is existing URL, via subrequest)
     Checks whether or not TestString is a valid URL, accessible via all the server's currently-configured access controls for that path. This uses an internal subrequest to do the check, so use it with care - it can impact your server's performance!
   All of these tests can also be prefixed by an exclamation mark ('!') to negate their meaning.
3. You can also set special flags for CondPattern by appending [flags] as the third argument to the RewriteCond directive, where flags is a comma-separated list of any of the following flags:
   • 'nocase|NC' (no case)
     This makes the test case-insensitive - differences between 'A-Z' and 'a-z' are ignored, both in the expanded TestString and the CondPattern. This flag is effective only for comparisons between TestString and CondPattern. It has no effect on filesystem and subrequest checks.
   • 'ornext|OR' (or next condition)
     Use this to combine rule conditions with a local OR instead of the implicit AND. Typical example:

     RewriteCond %{REMOTE_HOST}  =host1  [OR]
     RewriteCond %{REMOTE_HOST}  =host2  [OR]
     RewriteCond %{REMOTE_HOST}  =host3
     RewriteRule ...some special stuff for any of these hosts...
     

     Without this flag you would have to write the condition/rule pair three times.
   • 'novary|NV' (no vary)
     If a HTTP header is used in the condition, this flag prevents this header from being added to the Vary header of the response.
     Using this flag might break proper caching of the response if the representation of this response varies on the value of this header. So this flag should be only used if the meaning of the Vary header is well understood.

Example:

To rewrite the Homepage of a site according to the ``User-Agent:'' header of the request, you can use the following:

RewriteCond  %{HTTP_USER_AGENT}  ^Mozilla
RewriteRule  ^/$                 /homepage.max.html  [L]

RewriteCond  %{HTTP_USER_AGENT}  ^Lynx
RewriteRule  ^/$                 /homepage.min.html  [L]

RewriteRule  ^/$                 /homepage.std.html  [L]

Explanation: If you use a browser which identifies itself as 'Mozilla' (including Netscape Navigator, Mozilla etc), then you get the max homepage (which could include frames, or other special features). If you use the Lynx browser (which is terminal-based), then you get the min homepage (which could be a version designed for easy, text-only browsing). If neither of these conditions apply (you use any other browser, or your browser identifies itself as something non-standard), you get the std (standard) homepage.

The RewriteRule directive is the real rewriting workhorse. The directive can occur more than once, with each instance defining a single rewrite rule. The order in which these rules are defined is important - this is the order in which they will be applied at run-time.

Pattern is a perl compatible regular expression. On the first RewriteRule it is applied to the (%-decoded) URL-path of the request; subsequent patterns are applied to the output of the last matched RewriteRule.

For some hints on regular expressions, see the mod_rewrite Introduction.

In mod_rewrite, the NOT character ('!') is also available as a possible pattern prefix. This enables you to negate a pattern; to say, for instance: ``if the current URL does NOT match this pattern''. This can be used for exceptional cases, where it is easier to match the negative pattern, or as a last default rule.

The Substitution of a rewrite rule is the string that replaces the original URL-path that was matched by Pattern. The Substitution may be a:

file-system path

Designates the location on the file-system of the resource to be delivered to the client. Substitutions are only treated as a file-system path when the rule is configured in server (virtualhost) context and the first component of the path in the substitution is exists in the file-system

URL-path

A DocumentRoot-relative path to the resource to be served. Note that mod_rewrite tries to guess whether you have specified a file-system path or a URL-path by checking to see if the first segment of the path exists at the root of the file-system. For example, if you specify a Substitution string of /www/file.html, then this will be treated as a URL-path unless a directory named www exists at the root or your file-system (or, in the case of using rewrites in a .htaccess file, relative to your document root), in which case it will be treated as a file-system path. If you wish other URL-mapping directives (such as Alias) to be applied to the resulting URL-path, use the [PT] flag as described below.

Absolute URL

If an absolute URL is specified, mod_rewrite checks to see whether the hostname matches the current host. If it does, the scheme and hostname are stripped out and the resulting path is treated as a URL-path. Otherwise, an external redirect is performed for the given URL. To force an external redirect back to the current host, see the [R] flag below.

- (dash)

A dash indicates that no substitution should be performed (the existing path is passed through untouched). This is used when a flag (see below) needs to be applied without changing the path.

In addition to plain text, the Substition string can include

1. back-references ($N) to the RewriteRule pattern
2. back-references (%N) to the last matched RewriteCond pattern
3. server-variables as in rule condition test-strings (%{VARNAME})
4. mapping-function calls (${mapname:key|default})

Back-references are identifiers of the form $N (N=0..9), which will be replaced by the contents of the Nth group of the matched Pattern. The server-variables are the same as for the TestString of a RewriteCond directive. The mapping-functions come from the RewriteMap directive and are explained there. These three types of variables are expanded in the order above.

Rewrite rules are a applied to the results of previous rewrite rules, in the order in which they are defined in the config file. The URL is completely replaced by the Substitution and the rewriting process continues until all rules have been applied, or it is explicitly terminated by a L flag, or other flag which implies immediate termination, such as END or F.

Additionally you can set special actions to be performed by appending [flags] as the third argument to the RewriteRule directive. Flags is a comma-separated list, surround by square brackets, of any of the flags in the following table. More details, and examples, for each flag, are available in the Rewrite Flags document.

Here are all possible substitution combinations and their meanings:

Inside per-server configuration (httpd.conf)
for request ``GET /somepath/pathinfo'':

Given Rule                                      Resulting Substitution
----------------------------------------------  ----------------------------------
^/somepath(.*) otherpath$1                      invalid, not supported

^/somepath(.*) otherpath$1  [R]                 invalid, not supported

^/somepath(.*) otherpath$1  [P]                 invalid, not supported
----------------------------------------------  ----------------------------------
^/somepath(.*) /otherpath$1                     /otherpath/pathinfo

^/somepath(.*) /otherpath$1 [R]                 http://thishost/otherpath/pathinfo
                                                via external redirection

^/somepath(.*) /otherpath$1 [P]                 doesn't make sense, not supported
----------------------------------------------  ----------------------------------
^/somepath(.*) http://thishost/otherpath$1      /otherpath/pathinfo

^/somepath(.*) http://thishost/otherpath$1 [R]  http://thishost/otherpath/pathinfo
                                                via external redirection

^/somepath(.*) http://thishost/otherpath$1 [P]  doesn't make sense, not supported
----------------------------------------------  ----------------------------------
^/somepath(.*) http://otherhost/otherpath$1     http://otherhost/otherpath/pathinfo
                                                via external redirection

^/somepath(.*) http://otherhost/otherpath$1 [R] http://otherhost/otherpath/pathinfo
                                                via external redirection
                                                (the [R] flag is redundant)

^/somepath(.*) http://otherhost/otherpath$1 [P] http://otherhost/otherpath/pathinfo
                                                via internal proxy

Inside per-directory configuration for /somepath
(/physical/path/to/somepath/.htaccess, with RewriteBase /somepath)
for request ``GET /somepath/localpath/pathinfo'':

Given Rule                                      Resulting Substitution
----------------------------------------------  ----------------------------------
^localpath(.*) otherpath$1                      /somepath/otherpath/pathinfo

^localpath(.*) otherpath$1  [R]                 http://thishost/somepath/otherpath/pathinfo
                                                via external redirection

^localpath(.*) otherpath$1  [P]                 doesn't make sense, not supported
----------------------------------------------  ----------------------------------
^localpath(.*) /otherpath$1                     /otherpath/pathinfo

^localpath(.*) /otherpath$1 [R]                 http://thishost/otherpath/pathinfo
                                                via external redirection

^localpath(.*) /otherpath$1 [P]                 doesn't make sense, not supported
----------------------------------------------  ----------------------------------
^localpath(.*) http://thishost/otherpath$1      /otherpath/pathinfo

^localpath(.*) http://thishost/otherpath$1 [R]  http://thishost/otherpath/pathinfo
                                                via external redirection

^localpath(.*) http://thishost/otherpath$1 [P]  doesn't make sense, not supported
----------------------------------------------  ----------------------------------
^localpath(.*) http://otherhost/otherpath$1     http://otherhost/otherpath/pathinfo
                                                via external redirection

^localpath(.*) http://otherhost/otherpath$1 [R] http://otherhost/otherpath/pathinfo
                                                via external redirection
                                                (the [R] flag is redundant)

^localpath(.*) http://otherhost/otherpath$1 [P] http://otherhost/otherpath/pathinfo
                                                via internal proxy