//***************************************************************************
//
//  hbaapi.mof
//
//  Module: WDM classes to expose HBA api data from drivers
//
//  Purpose: Contains WDM classes that specify the HBA data to be exposed
//           via the HBA api set.
//
//  NOTE: This file contains information that is based upon an earlier
//        revision of the HBAAPI 2.18 specification.
//
//  NOTE: This is currently under revision to SM-HBA Dec 2005
//
//  Copyright (c) 2001 Microsoft Corporation
//
//***************************************************************************

#pragma autorecover
#pragma classflags(64)
#pragma namespace("\\\\.\\root\\wmi")
instance of __namespace{ name="ms_c0a";};
#pragma namespace("\\\\.\\root\\wmi\\ms_c0a")

[Description("Esta clase muestra información de administración de FC3 asociada con un adaptador de canal de fibra. Debe haber una instancia de esta clase para cada adaptador") : Amended ToSubclass,AMENDMENT, LOCALE(0x0c0a)] 
class HBAFC3MgmtInfo
{
  [Description("Identificador único para el adaptador. Este identificador debe ser único entre todos los adaptadores. Se debe usar el mismo valor para el identificador en otras clases que muestren información del adaptador") : Amended ToSubclass] uint64 UniqueAdapterId;
};

[Description("Esta clase muestra eventos de vínculos HBA") : Amended ToSubclass,AMENDMENT, LOCALE(0x0c0a)] 
class MSFC_LinkEvent : WMIEvent
{
  [Description("Tipo de evento") : Amended ToSubclass,Values{"HBA_EVENT_ADAPTER_UNKNOWN", "HBA_EVENT_ADAPTER_ADD", "HBA_EVENT_ADAPTER_REMOVE", "HBA_EVENT_ADAPTER_CHANGE", "HBA_EVENT_PORT_UNKNOWN", "HBA_EVENT_PORT_OFFLINE", "HBA_EVENT_PORT_ONLINE", "HBA_EVENT_PORT_NEW_TARGETS", "HBA_EVENT_PORT_FABRIC", "HBA_EVENT_PORT_BROADCAST_CHANGE", "HBA_EVENT_PORT_BROADCAST_D24_0", "HBA_EVENT_PORT_BROADCAST_D27_4", "HBA_EVENT_PORT_BROADCAST_SES", "HBA_EVENT_PORT_BROADCAST_D01_4", "HBA_EVENT_PORT_BROADCAST_D04_7", "HBA_EVENT_PORT_BROADCAST_D16_7", "HBA_EVENT_PORT_BROADCAST_D29_7", "HBA_EVENT_PORT_ALL", "HBA_EVENT_PORT_STAT_THRESHOLD", "HBA_EVENT_PORT_STAT_GROWTH", "HBA_EVENT_PHY_STAT_THRESHOLD", "HBA_EVENT_PHY_STAT_GROWTH", "HBA_EVENT_TARGET_UNKNOWN", "HBA_EVENT_TARGET_OFFLINE", "HBA_EVENT_TARGET_ONLINE", "HBA_EVENT_TARGET_REMOVED", "HBA_EVENT_LINK_UNKNOWN", "HBA_EVENT_LINK_INCIDENT"} : Amended ToSubclass] uint32 EventType;
  [Description("Puerto WWN detectado") : Amended ToSubclass] uint8 AdapterWWN[];
  [Description("Tamaño del búfer RLIR") : Amended ToSubclass] uint32 RLIRBufferSize;
  [Description("Tamaño del búfer RLIR") : Amended ToSubclass] uint8 RLIRBuffer[];
};

[Description("Esta clase muestra información de atributo asociada con un adaptador de canal de fibra. Debe haber una instancia de esta clase para cada adaptador") : Amended ToSubclass,AMENDMENT, LOCALE(0x0c0a)] 
class MSFC_FCAdapterHBAAttributes
{
  [Description("Identificador único para el adaptador. Este identificador debe ser único entre todos los adaptadores. Se debe usar el mismo valor para el identificador en otras clases que muestren información del adaptador") : Amended ToSubclass] uint64 UniqueAdapterId;
  [Description("Resultado del Estado de HBA para la operación de consulta") : Amended ToSubclass,Values{"La operación se realizó correctamente ", "Error ", "Función no admitida.", "identificador no válido ", "Argumento incorrecto ", "WWN no reconocido ", "Índice no reconocido ", "Se requiere un búfer más grande ", "La información cambió desde la última llamada a HBA_RefreshInformation ", "Condición de comprobación de SCSI notificada", "Adaptador ocupado o reservado; inténtelo de nuevo", "Se agotó el tiempo de espera de la solicitud; inténtelo de nuevo", "Se quitó o desactivó un HBA al que se hace referencia", "El adaptador local rechazó el ELS solicitado", "El adaptador especificado no proporciona el LUN especificado", "Se detectó una incompatibilidad entre los módulos de controlador y la biblioteca", "Hay varios adaptadores con un WWN coincidente", "Una solicitud de enlace persistente incluía un número de bus SCSI local incorrecto", "Una solicitud de enlace persistente incluía un número de destino SCSI local incorrecto", "Una solicitud de enlace persistente incluía un número de unidad lógica SCSI local incorrecto", "Una solicitud de establecimiento de enlace persistente incluía un identificador de SCSI local ya enlazado", "Una solicitud de enlace persistente incluía un identificador de FC de destino de FCP incorrecto o que no se encuentra", "Una solicitud de enlace persistente incluía un WWN de nodo de destino de FCP incorrecto", "Una solicitud de enlace persistente incluía un WWN de puerto de destino de FCP incorrecto", "Una solicitud de enlace persistente incluía un número de unidad lógica de FCP no definido por el destino identificado", "Una solicitud de enlace persistente incluía un identificador único de unidad lógica no definido o inaccesible", "Una solicitud de eliminación de enlace persistente incluía un enlace que no coincidía con uno establecido por el puerto especificado", "Se solicitó un comando SCSI para un Nx_Port que no era un puerto de destino SCSI", "Se realizó una solicitud sobre un protocolo FC-4 no admitido", "Se realizó una solicitud para habilitar las capacidades no implementadas para un puerto", "El destino SCSI está ocupado", "Se llamó a HBA_FreeLibrary cuando no se cargó ninguna biblioteca", "Se llamó a HBA_LoadLibrary cuando ya había una biblioteca cargada", "El FCID pasado a HBA_SendRNIDV2 infringe las reglas de control de acceso"} : Amended ToSubclass] uint32 HBAStatus;
};

[AMENDMENT, LOCALE(0x0c0a)] 
class MSFC_HBAPortAttributesResults
{
  [Values{"Desconocido", "Otros", "Ausente", "Tejido", "Bucle público", "HBA_PORTTYPE_FLPORT", "Puerto tejido", "Puerto de expansión de tejido", "Puerto tejido genérico", "Bucle privado", "Punto a punto", "SAS (SSP o STP)", "SATA (conexión directa)", "Ampliador SAS"} : Amended ToSubclass] uint32 PortType;
  [Values{"Desconocido", "Operativo", "Usuario sin conexión", "Omitido", "En modo de diagnóstico", "Vínculo inactivo", "Error de puerto", "Bucle invertido", "Degradado"} : Amended ToSubclass] uint32 PortState;
  [Values{"1 GBit/s", "2 GBit/s", "10 GBit/s", "4 GBit/s"} : Amended ToSubclass] uint32 PortSupportedSpeed;
  [Values{"1 GBit/s", "2 GBit/s", "10 GBit/s", "4 GBit/s"} : Amended ToSubclass] uint32 PortSpeed;
};

[Description("Esta clase muestra información de atributo asociada con un puerto de canal de fibra. Debe haber una instancia de esta clase para cada puerto.") : Amended ToSubclass,AMENDMENT, LOCALE(0x0c0a)] 
class MSFC_FibrePortHBAAttributes
{
  [Description("Identificador único para el puerto. Este identificador debe ser único entre todos los puertos de todos los adaptadores. Se debe usar el mismo valor para el identificador para el mismo puerto en otras clases que muestren información del puerto") : Amended ToSubclass] uint64 UniquePortId;
  [Description("Resultado del Estado de HBA para la operación de consulta") : Amended ToSubclass,Values{"La operación se realizó correctamente ", "Error ", "Función no admitida.", "Identificador no válido ", "Argumento incorrecto ", "WWN no reconocido ", "Índice no reconocido ", "Se requiere un búfer más grande ", "La información cambió desde la última llamada a HBA_RefreshInformation ", "Condición de comprobación de SCSI notificada", "Adaptador ocupado o reservado; inténtelo de nuevo", "Se agotó el tiempo de espera de la solicitud; inténtelo de nuevo", "Se quitó o desactivó un HBA al que se hace referencia", "El adaptador local rechazó el ELS solicitado", "El adaptador especificado no proporciona el LUN especificado", "Se detectó una incompatibilidad entre los módulos de controlador y la biblioteca", "Hay varios adaptadores con un WWN coincidente", "Una solicitud de enlace persistente incluía un número de bus SCSI local incorrecto", "Una solicitud de enlace persistente incluía un número de destino SCSI local incorrecto", "Una solicitud de enlace persistente incluía un número de unidad lógica SCSI local incorrecto", "Una solicitud de establecimiento de enlace persistente incluía un identificador de SCSI local ya enlazado", "Una solicitud de enlace persistente incluía un identificador de FC de destino de FCP incorrecto o que no se encuentra", "Una solicitud de enlace persistente incluía un WWN de nodo de destino de FCP incorrecto", "Una solicitud de enlace persistente incluía un WWN de puerto de destino de FCP incorrecto", "Una solicitud de enlace persistente incluía un número de unidad lógica de FCP no definido por el destino identificado", "Una solicitud de enlace persistente incluía un identificador único de unidad lógica no definido o inaccesible", "Una solicitud de eliminación de enlace persistente incluía un enlace que no coincidía con uno establecido por el puerto especificado", "Se solicitó un comando SCSI para un Nx_Port que no era un puerto de destino SCSI", "Se realizó una solicitud sobre un protocolo FC-4 no admitido", "Se realizó una solicitud para habilitar las capacidades no implementadas para un puerto", "El destino SCSI está ocupado", "Se llamó a HBA_FreeLibrary cuando no se cargó ninguna biblioteca", "Se llamó a HBA_LoadLibrary cuando ya había una biblioteca cargada", "El FCID pasado a HBA_SendRNIDV2 infringe las reglas de control de acceso"} : Amended ToSubclass] uint32 HBAStatus;
};

[Description("Esta clase muestra información estadística asociada con un puerto de canal de fibra. Debe haber una instancia de esta clase para cada puerto.") : Amended ToSubclass,AMENDMENT, LOCALE(0x0c0a)] 
class MSFC_FibrePortHBAStatistics
{
  [Description("Identificador único para el puerto. Este identificador debe ser único entre todos los puertos de todos los adaptadores. Se debe usar el mismo valor para el identificador para el mismo puerto en otras clases que muestren información del puerto") : Amended ToSubclass] uint64 UniquePortId;
  [Description("Resultado del Estado de HBA para la operación de consulta") : Amended ToSubclass,Values{"La operación se realizó correctamente ", "Error ", "Función no admitida.", "Identificador no válido ", "Argumento incorrecto ", "WWN no reconocido ", "Índice no reconocido ", "Se requiere un búfer más grande ", "La información cambió desde la última llamada a HBA_RefreshInformation ", "Condición de comprobación de SCSI notificada", "Adaptador ocupado o reservado; inténtelo de nuevo", "Se agotó el tiempo de espera de la solicitud; inténtelo de nuevo", "Se quitó o desactivó un HBA al que se hace referencia", "El adaptador local rechazó el ELS solicitado", "El adaptador especificado no proporciona el LUN especificado", "Se detectó una incompatibilidad entre los módulos de controlador y la biblioteca", "Hay varios adaptadores con un WWN coincidente", "Una solicitud de enlace persistente incluía un número de bus SCSI local incorrecto", "Una solicitud de enlace persistente incluía un número de destino SCSI local incorrecto", "Una solicitud de enlace persistente incluía un número de unidad lógica SCSI local incorrecto", "Una solicitud de establecimiento de enlace persistente incluía un identificador de SCSI local ya enlazado", "Una solicitud de enlace persistente incluía un identificador de FC de destino de FCP incorrecto o que no se encuentra", "Una solicitud de enlace persistente incluía un WWN de nodo de destino de FCP incorrecto", "Una solicitud de enlace persistente incluía un WWN de puerto de destino de FCP incorrecto", "Una solicitud de enlace persistente incluía un número de unidad lógica de FCP no definido por el destino identificado", "Una solicitud de enlace persistente incluía un identificador único de unidad lógica no definido o inaccesible", "Una solicitud de eliminación de enlace persistente incluía un enlace que no coincidía con uno establecido por el puerto especificado", "Se solicitó un comando SCSI para un Nx_Port que no era un puerto de destino SCSI", "Se realizó una solicitud sobre un protocolo FC-4 no admitido", "Se realizó una solicitud para habilitar las capacidades no implementadas para un puerto", "El destino SCSI está ocupado", "Se llamó a HBA_FreeLibrary cuando no se cargó ninguna biblioteca", "Se llamó a HBA_LoadLibrary cuando ya había una biblioteca cargada", "El FCID pasado a HBA_SendRNIDV2 infringe las reglas de control de acceso"} : Amended ToSubclass] uint32 HBAStatus;
};

[Description("Esta clase muestra operaciones que se pueden realizar en un puerto de canal de fibra. Debe haber una instancia de esta clase para cada puerto.") : Amended ToSubclass,AMENDMENT, LOCALE(0x0c0a)] 
class MSFC_FibrePortHBAMethods
{
};

[Description("") : Amended ToSubclass,AMENDMENT, LOCALE(0x0c0a)] 
class MSFC_EventBuffer
{
};

[Description("Esta clase muestra las operaciones de detección de puertos que puede realizar un adaptador de canal de fibra. Debe haber una instancia de esta clase para cada adaptador") : Amended ToSubclass,AMENDMENT, LOCALE(0x0c0a)] 
class MSFC_HBAAdapterMethods
{
  void GetDiscoveredPortAttributes([in] uint32 PortIndex,[in] uint32 DiscoveredPortIndex,[out,Description("HBA Status result for the query operation") : Amended ToSubclass,Values{"Operation was successful ", "Error ", "Function not supported.", "invalid handle ", "Bad argument ", "WWN not recognized ", "Index not recognized ", "Larger buffer required ", "Information has changed since the last call to HBA_RefreshInformation ", "SCSI Check Condition reported", "Adapter busy or reserved, retry may be effective", "Request timed out, retry may be effective", "Referenced HBA has been removed or deactivated", "The requested ELS was rejected by the local adapter", "The specified LUN is not provided by the specified adapter", "An incompatibility has been detected among the library and driver modules", "Multiple adapters have a matching WWN", "A persistent binding request included a bad local SCSI bus number", "A persistent binding request included a bad local SCSI target number", "A persistent binding request included a bad local SCSI logical unit number", "A persistent binding set request included a local SCSI ID that was already bound", "A persistent binding request included a bad or unlocatable FCP Target FCID", "A persistent binding request included a bad FCP Target Node WWN", "A persistent binding request included a bad FCP Target Port WWN", "A persistent binding request included an FCP Logical Unit Number not defined by the identified Target", "A persistent binding request included an undefined or otherwise in accessible Logical Unit Unique Identifier", "A persistent binding remove request included a binding which did not match a binding established by the specified port", "A SCSI command was requested to an Nx_Port that was not a SCSI Target Port", "A request was made concerning an unsupported FC-4 protocol", "A request was made to enable unimplemented capabilities for a port", "SCSI target is busy", "A call was made to HBA_FreeLibrary when no library was loaded", "A call was made to HBA_LoadLibrary when a library was already loaded", "FCID passed into HBA_SendRNIDV2 violates access control rules"} : Amended ToSubclass] uint32 HBAStatus,[out] MSFC_HBAPortAttributesResults PortAttributes);
  void GetPortAttributesByWWN([in] uint8 wwn[],[out,Description("HBA Status result for the query operation") : Amended ToSubclass,Values{"Operation was successful ", "Error ", "Function not supported.", "invalid handle ", "Bad argument ", "WWN not recognized ", "Index not recognized ", "Larger buffer required ", "Information has changed since the last call to HBA_RefreshInformation ", "SCSI Check Condition reported", "Adapter busy or reserved, retry may be effective", "Request timed out, retry may be effective", "Referenced HBA has been removed or deactivated", "The requested ELS was rejected by the local adapter", "The specified LUN is not provided by the specified adapter", "An incompatibility has been detected among the library and driver modules", "Multiple adapters have a matching WWN", "A persistent binding request included a bad local SCSI bus number", "A persistent binding request included a bad local SCSI target number", "A persistent binding request included a bad local SCSI logical unit number", "A persistent binding set request included a local SCSI ID that was already bound", "A persistent binding request included a bad or unlocatable FCP Target FCID", "A persistent binding request included a bad FCP Target Node WWN", "A persistent binding request included a bad FCP Target Port WWN", "A persistent binding request included an FCP Logical Unit Number not defined by the identified Target", "A persistent binding request included an undefined or otherwise in accessible Logical Unit Unique Identifier", "A persistent binding remove request included a binding which did not match a binding established by the specified port", "A SCSI command was requested to an Nx_Port that was not a SCSI Target Port", "A request was made concerning an unsupported FC-4 protocol", "A request was made to enable unimplemented capabilities for a port", "SCSI target is busy", "A call was made to HBA_FreeLibrary when no library was loaded", "A call was made to HBA_LoadLibrary when a library was already loaded", "FCID passed into HBA_SendRNIDV2 violates access control rules"} : Amended ToSubclass] uint32 HBAStatus,[out] MSFC_HBAPortAttributesResults PortAttributes);
  void SendCTPassThru([in] uint8 PortWWN[],[in] uint32 RequestBufferCount,[in] uint8 RequestBuffer[],[out,Description("HBA Status result for the query operation") : Amended ToSubclass,Values{"Operation was successful ", "Error ", "Function not supported.", "invalid handle ", "Bad argument ", "WWN not recognized ", "Index not recognized ", "Larger buffer required ", "Information has changed since the last call to HBA_RefreshInformation ", "SCSI Check Condition reported", "Adapter busy or reserved, retry may be effective", "Request timed out, retry may be effective", "Referenced HBA has been removed or deactivated", "The requested ELS was rejected by the local adapter", "The specified LUN is not provided by the specified adapter", "An incompatibility has been detected among the library and driver modules", "Multiple adapters have a matching WWN", "A persistent binding request included a bad local SCSI bus number", "A persistent binding request included a bad local SCSI target number", "A persistent binding request included a bad local SCSI logical unit number", "A persistent binding set request included a local SCSI ID that was already bound", "A persistent binding request included a bad or unlocatable FCP Target FCID", "A persistent binding request included a bad FCP Target Node WWN", "A persistent binding request included a bad FCP Target Port WWN", "A persistent binding request included an FCP Logical Unit Number not defined by the identified Target", "A persistent binding request included an undefined or otherwise in accessible Logical Unit Unique Identifier", "A persistent binding remove request included a binding which did not match a binding established by the specified port", "A SCSI command was requested to an Nx_Port that was not a SCSI Target Port", "A request was made concerning an unsupported FC-4 protocol", "A request was made to enable unimplemented capabilities for a port", "SCSI target is busy", "A call was made to HBA_FreeLibrary when no library was loaded", "A call was made to HBA_LoadLibrary when a library was already loaded", "FCID passed into HBA_SendRNIDV2 violates access control rules"} : Amended ToSubclass] uint32 HBAStatus,[out] uint32 TotalResponseBufferCount,[out] uint32 ActualResponseBufferCount,[out] uint8 ResponseBuffer[]);
  void SendRNID([in] uint8 wwn[],[in,Values{"NODE_WWN", "PORT_WWN"} : Amended ToSubclass] uint32 wwntype,[out,Description("HBA Status result for the query operation") : Amended ToSubclass,Values{"Operation was successful ", "Error ", "Function not supported.", "invalid handle ", "Bad argument ", "WWN not recognized ", "Index not recognized ", "Larger buffer required ", "Information has changed since the last call to HBA_RefreshInformation ", "SCSI Check Condition reported", "Adapter busy or reserved, retry may be effective", "Request timed out, retry may be effective", "Referenced HBA has been removed or deactivated", "The requested ELS was rejected by the local adapter", "The specified LUN is not provided by the specified adapter", "An incompatibility has been detected among the library and driver modules", "Multiple adapters have a matching WWN", "A persistent binding request included a bad local SCSI bus number", "A persistent binding request included a bad local SCSI target number", "A persistent binding request included a bad local SCSI logical unit number", "A persistent binding set request included a local SCSI ID that was already bound", "A persistent binding request included a bad or unlocatable FCP Target FCID", "A persistent binding request included a bad FCP Target Node WWN", "A persistent binding request included a bad FCP Target Port WWN", "A persistent binding request included an FCP Logical Unit Number not defined by the identified Target", "A persistent binding request included an undefined or otherwise in accessible Logical Unit Unique Identifier", "A persistent binding remove request included a binding which did not match a binding established by the specified port", "A SCSI command was requested to an Nx_Port that was not a SCSI Target Port", "A request was made concerning an unsupported FC-4 protocol", "A request was made to enable unimplemented capabilities for a port", "SCSI target is busy", "A call was made to HBA_FreeLibrary when no library was loaded", "A call was made to HBA_LoadLibrary when a library was already loaded", "FCID passed into HBA_SendRNIDV2 violates access control rules"} : Amended ToSubclass] uint32 HBAStatus,[out] uint32 ResponseBufferCount,[out] uint8 ResponseBuffer[]);
  void SendRNIDV2([in] uint8 PortWWN[],[in] uint8 DestWWN[],[in] uint32 DestFCID,[in] uint32 NodeIdDataFormat,[out,Description("HBA Status result for the query operation") : Amended ToSubclass,Values{"Operation was successful ", "Error ", "Function not supported.", "invalid handle ", "Bad argument ", "WWN not recognized ", "Index not recognized ", "Larger buffer required ", "Information has changed since the last call to HBA_RefreshInformation ", "SCSI Check Condition reported", "Adapter busy or reserved, retry may be effective", "Request timed out, retry may be effective", "Referenced HBA has been removed or deactivated", "The requested ELS was rejected by the local adapter", "The specified LUN is not provided by the specified adapter", "An incompatibility has been detected among the library and driver modules", "Multiple adapters have a matching WWN", "A persistent binding request included a bad local SCSI bus number", "A persistent binding request included a bad local SCSI target number", "A persistent binding request included a bad local SCSI logical unit number", "A persistent binding set request included a local SCSI ID that was already bound", "A persistent binding request included a bad or unlocatable FCP Target FCID", "A persistent binding request included a bad FCP Target Node WWN", "A persistent binding request included a bad FCP Target Port WWN", "A persistent binding request included an FCP Logical Unit Number not defined by the identified Target", "A persistent binding request included an undefined or otherwise in accessible Logical Unit Unique Identifier", "A persistent binding remove request included a binding which did not match a binding established by the specified port", "A SCSI command was requested to an Nx_Port that was not a SCSI Target Port", "A request was made concerning an unsupported FC-4 protocol", "A request was made to enable unimplemented capabilities for a port", "SCSI target is busy", "A call was made to HBA_FreeLibrary when no library was loaded", "A call was made to HBA_LoadLibrary when a library was already loaded", "FCID passed into HBA_SendRNIDV2 violates access control rules"} : Amended ToSubclass] uint32 HBAStatus,[out] uint32 TotalRspBufferSize,[out] uint32 ActualRspBufferSize,[out] uint8 RspBuffer[]);
  void GetFC3MgmtInfo([out,Description("HBA Status result for the query operation") : Amended ToSubclass,Values{"Operation was successful ", "Error ", "Function not supported.", "invalid handle ", "Bad argument ", "WWN not recognized ", "Index not recognized ", "Larger buffer required ", "Information has changed since the last call to HBA_RefreshInformation ", "SCSI Check Condition reported", "Adapter busy or reserved, retry may be effective", "Request timed out, retry may be effective", "Referenced HBA has been removed or deactivated", "The requested ELS was rejected by the local adapter", "The specified LUN is not provided by the specified adapter", "An incompatibility has been detected among the library and driver modules", "Multiple adapters have a matching WWN", "A persistent binding request included a bad local SCSI bus number", "A persistent binding request included a bad local SCSI target number", "A persistent binding request included a bad local SCSI logical unit number", "A persistent binding set request included a local SCSI ID that was already bound", "A persistent binding request included a bad or unlocatable FCP Target FCID", "A persistent binding request included a bad FCP Target Node WWN", "A persistent binding request included a bad FCP Target Port WWN", "A persistent binding request included an FCP Logical Unit Number not defined by the identified Target", "A persistent binding request included an undefined or otherwise in accessible Logical Unit Unique Identifier", "A persistent binding remove request included a binding which did not match a binding established by the specified port", "A SCSI command was requested to an Nx_Port that was not a SCSI Target Port", "A request was made concerning an unsupported FC-4 protocol", "A request was made to enable unimplemented capabilities for a port", "SCSI target is busy", "A call was made to HBA_FreeLibrary when no library was loaded", "A call was made to HBA_LoadLibrary when a library was already loaded", "FCID passed into HBA_SendRNIDV2 violates access control rules"} : Amended ToSubclass] uint32 HBAStatus,[out] HBAFC3MgmtInfo MgmtInfo);
  void SetFC3MgmtInfo([in] HBAFC3MgmtInfo MgmtInfo,[out,Description("HBA Status result for the query operation") : Amended ToSubclass,Values{"Operation was successful ", "Error ", "Function not supported.", "invalid handle ", "Bad argument ", "WWN not recognized ", "Index not recognized ", "Larger buffer required ", "Information has changed since the last call to HBA_RefreshInformation ", "SCSI Check Condition reported", "Adapter busy or reserved, retry may be effective", "Request timed out, retry may be effective", "Referenced HBA has been removed or deactivated", "The requested ELS was rejected by the local adapter", "The specified LUN is not provided by the specified adapter", "An incompatibility has been detected among the library and driver modules", "Multiple adapters have a matching WWN", "A persistent binding request included a bad local SCSI bus number", "A persistent binding request included a bad local SCSI target number", "A persistent binding request included a bad local SCSI logical unit number", "A persistent binding set request included a local SCSI ID that was already bound", "A persistent binding request included a bad or unlocatable FCP Target FCID", "A persistent binding request included a bad FCP Target Node WWN", "A persistent binding request included a bad FCP Target Port WWN", "A persistent binding request included an FCP Logical Unit Number not defined by the identified Target", "A persistent binding request included an undefined or otherwise in accessible Logical Unit Unique Identifier", "A persistent binding remove request included a binding which did not match a binding established by the specified port", "A SCSI command was requested to an Nx_Port that was not a SCSI Target Port", "A request was made concerning an unsupported FC-4 protocol", "A request was made to enable unimplemented capabilities for a port", "SCSI target is busy", "A call was made to HBA_FreeLibrary when no library was loaded", "A call was made to HBA_LoadLibrary when a library was already loaded", "FCID passed into HBA_SendRNIDV2 violates access control rules"} : Amended ToSubclass] uint32 HBAStatus);
  void SendRPL([in] uint8 PortWWN[],[in] uint8 AgentWWN[],[in] uint32 agent_domain,[in] uint32 portIndex,[out,Description("HBA Status result for the query operation") : Amended ToSubclass,Values{"Operation was successful ", "Error ", "Function not supported.", "invalid handle ", "Bad argument ", "WWN not recognized ", "Index not recognized ", "Larger buffer required ", "Information has changed since the last call to HBA_RefreshInformation ", "SCSI Check Condition reported", "Adapter busy or reserved, retry may be effective", "Request timed out, retry may be effective", "Referenced HBA has been removed or deactivated", "The requested ELS was rejected by the local adapter", "The specified LUN is not provided by the specified adapter", "An incompatibility has been detected among the library and driver modules", "Multiple adapters have a matching WWN", "A persistent binding request included a bad local SCSI bus number", "A persistent binding request included a bad local SCSI target number", "A persistent binding request included a bad local SCSI logical unit number", "A persistent binding set request included a local SCSI ID that was already bound", "A persistent binding request included a bad or unlocatable FCP Target FCID", "A persistent binding request included a bad FCP Target Node WWN", "A persistent binding request included a bad FCP Target Port WWN", "A persistent binding request included an FCP Logical Unit Number not defined by the identified Target", "A persistent binding request included an undefined or otherwise in accessible Logical Unit Unique Identifier", "A persistent binding remove request included a binding which did not match a binding established by the specified port", "A SCSI command was requested to an Nx_Port that was not a SCSI Target Port", "A request was made concerning an unsupported FC-4 protocol", "A request was made to enable unimplemented capabilities for a port", "SCSI target is busy", "A call was made to HBA_FreeLibrary when no library was loaded", "A call was made to HBA_LoadLibrary when a library was already loaded", "FCID passed into HBA_SendRNIDV2 violates access control rules"} : Amended ToSubclass] uint32 HBAStatus,[out] uint32 TotalRspBufferSize,[out] uint32 ActualRspBufferSize,[out] uint8 RspBuffer[]);
  void SendRPS([in] uint8 PortWWN[],[in] uint8 AgentWWN[],[in] uint8 ObjectWWN[],[in] uint32 AgentDomain,[in] uint32 ObjectPortNumber,[out,Description("HBA Status result for the query operation") : Amended ToSubclass,Values{"Operation was successful ", "Error ", "Function not supported.", "invalid handle ", "Bad argument ", "WWN not recognized ", "Index not recognized ", "Larger buffer required ", "Information has changed since the last call to HBA_RefreshInformation ", "SCSI Check Condition reported", "Adapter busy or reserved, retry may be effective", "Request timed out, retry may be effective", "Referenced HBA has been removed or deactivated", "The requested ELS was rejected by the local adapter", "The specified LUN is not provided by the specified adapter", "An incompatibility has been detected among the library and driver modules", "Multiple adapters have a matching WWN", "A persistent binding request included a bad local SCSI bus number", "A persistent binding request included a bad local SCSI target number", "A persistent binding request included a bad local SCSI logical unit number", "A persistent binding set request included a local SCSI ID that was already bound", "A persistent binding request included a bad or unlocatable FCP Target FCID", "A persistent binding request included a bad FCP Target Node WWN", "A persistent binding request included a bad FCP Target Port WWN", "A persistent binding request included an FCP Logical Unit Number not defined by the identified Target", "A persistent binding request included an undefined or otherwise in accessible Logical Unit Unique Identifier", "A persistent binding remove request included a binding which did not match a binding established by the specified port", "A SCSI command was requested to an Nx_Port that was not a SCSI Target Port", "A request was made concerning an unsupported FC-4 protocol", "A request was made to enable unimplemented capabilities for a port", "SCSI target is busy", "A call was made to HBA_FreeLibrary when no library was loaded", "A call was made to HBA_LoadLibrary when a library was already loaded", "FCID passed into HBA_SendRNIDV2 violates access control rules"} : Amended ToSubclass] uint32 HBAStatus,[out] uint32 TotalRspBufferSize,[out] uint32 ActualRspBufferSize,[out] uint8 RspBuffer[]);
  void SendSRL([in] uint8 PortWWN[],[in] uint8 WWN[],[in] uint32 Domain,[out,Description("HBA Status result for the query operation") : Amended ToSubclass,Values{"Operation was successful ", "Error ", "Function not supported.", "invalid handle ", "Bad argument ", "WWN not recognized ", "Index not recognized ", "Larger buffer required ", "Information has changed since the last call to HBA_RefreshInformation ", "SCSI Check Condition reported", "Adapter busy or reserved, retry may be effective", "Request timed out, retry may be effective", "Referenced HBA has been removed or deactivated", "The requested ELS was rejected by the local adapter", "The specified LUN is not provided by the specified adapter", "An incompatibility has been detected among the library and driver modules", "Multiple adapters have a matching WWN", "A persistent binding request included a bad local SCSI bus number", "A persistent binding request included a bad local SCSI target number", "A persistent binding request included a bad local SCSI logical unit number", "A persistent binding set request included a local SCSI ID that was already bound", "A persistent binding request included a bad or unlocatable FCP Target FCID", "A persistent binding request included a bad FCP Target Node WWN", "A persistent binding request included a bad FCP Target Port WWN", "A persistent binding request included an FCP Logical Unit Number not defined by the identified Target", "A persistent binding request included an undefined or otherwise in accessible Logical Unit Unique Identifier", "A persistent binding remove request included a binding which did not match a binding established by the specified port", "A SCSI command was requested to an Nx_Port that was not a SCSI Target Port", "A request was made concerning an unsupported FC-4 protocol", "A request was made to enable unimplemented capabilities for a port", "SCSI target is busy", "A call was made to HBA_FreeLibrary when no library was loaded", "A call was made to HBA_LoadLibrary when a library was already loaded", "FCID passed into HBA_SendRNIDV2 violates access control rules"} : Amended ToSubclass] uint32 HBAStatus,[out] uint32 TotalRspBufferSize,[out] uint32 ActualRspBufferSize,[out] uint8 RspBuffer[]);
  void SendLIRR([in] uint8 SourceWWN[],[in] uint8 DestWWN[],[in] uint8 Function,[in] uint8 Type,[out,Description("HBA Status result for the query operation") : Amended ToSubclass,Values{"Operation was successful ", "Error ", "Function not supported.", "invalid handle ", "Bad argument ", "WWN not recognized ", "Index not recognized ", "Larger buffer required ", "Information has changed since the last call to HBA_RefreshInformation ", "SCSI Check Condition reported", "Adapter busy or reserved, retry may be effective", "Request timed out, retry may be effective", "Referenced HBA has been removed or deactivated", "The requested ELS was rejected by the local adapter", "The specified LUN is not provided by the specified adapter", "An incompatibility has been detected among the library and driver modules", "Multiple adapters have a matching WWN", "A persistent binding request included a bad local SCSI bus number", "A persistent binding request included a bad local SCSI target number", "A persistent binding request included a bad local SCSI logical unit number", "A persistent binding set request included a local SCSI ID that was already bound", "A persistent binding request included a bad or unlocatable FCP Target FCID", "A persistent binding request included a bad FCP Target Node WWN", "A persistent binding request included a bad FCP Target Port WWN", "A persistent binding request included an FCP Logical Unit Number not defined by the identified Target", "A persistent binding request included an undefined or otherwise in accessible Logical Unit Unique Identifier", "A persistent binding remove request included a binding which did not match a binding established by the specified port", "A SCSI command was requested to an Nx_Port that was not a SCSI Target Port", "A request was made concerning an unsupported FC-4 protocol", "A request was made to enable unimplemented capabilities for a port", "SCSI target is busy", "A call was made to HBA_FreeLibrary when no library was loaded", "A call was made to HBA_LoadLibrary when a library was already loaded", "FCID passed into HBA_SendRNIDV2 violates access control rules"} : Amended ToSubclass] uint32 HBAStatus,[out] uint32 TotalRspBufferSize,[out] uint32 ActualRspBufferSize,[out] uint8 RspBuffer[]);
  void GetFC4Statistics([in] uint8 PortWWN[],[in] uint8 FC4Type,[out,Description("HBA Status result for the query operation") : Amended ToSubclass,Values{"Operation was successful ", "Error ", "Function not supported.", "invalid handle ", "Bad argument ", "WWN not recognized ", "Index not recognized ", "Larger buffer required ", "Information has changed since the last call to HBA_RefreshInformation ", "SCSI Check Condition reported", "Adapter busy or reserved, retry may be effective", "Request timed out, retry may be effective", "Referenced HBA has been removed or deactivated", "The requested ELS was rejected by the local adapter", "The specified LUN is not provided by the specified adapter", "An incompatibility has been detected among the library and driver modules", "Multiple adapters have a matching WWN", "A persistent binding request included a bad local SCSI bus number", "A persistent binding request included a bad local SCSI target number", "A persistent binding request included a bad local SCSI logical unit number", "A persistent binding set request included a local SCSI ID that was already bound", "A persistent binding request included a bad or unlocatable FCP Target FCID", "A persistent binding request included a bad FCP Target Node WWN", "A persistent binding request included a bad FCP Target Port WWN", "A persistent binding request included an FCP Logical Unit Number not defined by the identified Target", "A persistent binding request included an undefined or otherwise in accessible Logical Unit Unique Identifier", "A persistent binding remove request included a binding which did not match a binding established by the specified port", "A SCSI command was requested to an Nx_Port that was not a SCSI Target Port", "A request was made concerning an unsupported FC-4 protocol", "A request was made to enable unimplemented capabilities for a port", "SCSI target is busy", "A call was made to HBA_FreeLibrary when no library was loaded", "A call was made to HBA_LoadLibrary when a library was already loaded", "FCID passed into HBA_SendRNIDV2 violates access control rules"} : Amended ToSubclass] uint32 HBAStatus,[out] MSFC_FC4STATISTICS FC4Statistics);
  void GetFCPStatistics([in] HBAScsiID ScsiId,[out,Description("HBA Status result for the query operation") : Amended ToSubclass,Values{"Operation was successful ", "Error ", "Function not supported.", "invalid handle ", "Bad argument ", "WWN not recognized ", "Index not recognized ", "Larger buffer required ", "Information has changed since the last call to HBA_RefreshInformation ", "SCSI Check Condition reported", "Adapter busy or reserved, retry may be effective", "Request timed out, retry may be effective", "Referenced HBA has been removed or deactivated", "The requested ELS was rejected by the local adapter", "The specified LUN is not provided by the specified adapter", "An incompatibility has been detected among the library and driver modules", "Multiple adapters have a matching WWN", "A persistent binding request included a bad local SCSI bus number", "A persistent binding request included a bad local SCSI target number", "A persistent binding request included a bad local SCSI logical unit number", "A persistent binding set request included a local SCSI ID that was already bound", "A persistent binding request included a bad or unlocatable FCP Target FCID", "A persistent binding request included a bad FCP Target Node WWN", "A persistent binding request included a bad FCP Target Port WWN", "A persistent binding request included an FCP Logical Unit Number not defined by the identified Target", "A persistent binding request included an undefined or otherwise in accessible Logical Unit Unique Identifier", "A persistent binding remove request included a binding which did not match a binding established by the specified port", "A SCSI command was requested to an Nx_Port that was not a SCSI Target Port", "A request was made concerning an unsupported FC-4 protocol", "A request was made to enable unimplemented capabilities for a port", "SCSI target is busy", "A call was made to HBA_FreeLibrary when no library was loaded", "A call was made to HBA_LoadLibrary when a library was already loaded", "FCID passed into HBA_SendRNIDV2 violates access control rules"} : Amended ToSubclass] uint32 HBAStatus,[out] MSFC_FC4STATISTICS FC4Statistics);
  void ScsiInquiry([in] uint8 Cdb[],[in] uint8 HbaPortWWN[],[in] uint8 DiscoveredPortWWN[],[in] uint64 FcLun,[out,Description("HBA Status result for the query operation") : Amended ToSubclass,Values{"Operation was successful ", "Error ", "Function not supported.", "invalid handle ", "Bad argument ", "WWN not recognized ", "Index not recognized ", "Larger buffer required ", "Information has changed since the last call to HBA_RefreshInformation ", "SCSI Check Condition reported", "Adapter busy or reserved, retry may be effective", "Request timed out, retry may be effective", "Referenced HBA has been removed or deactivated", "The requested ELS was rejected by the local adapter", "The specified LUN is not provided by the specified adapter", "An incompatibility has been detected among the library and driver modules", "Multiple adapters have a matching WWN", "A persistent binding request included a bad local SCSI bus number", "A persistent binding request included a bad local SCSI target number", "A persistent binding request included a bad local SCSI logical unit number", "A persistent binding set request included a local SCSI ID that was already bound", "A persistent binding request included a bad or unlocatable FCP Target FCID", "A persistent binding request included a bad FCP Target Node WWN", "A persistent binding request included a bad FCP Target Port WWN", "A persistent binding request included an FCP Logical Unit Number not defined by the identified Target", "A persistent binding request included an undefined or otherwise in accessible Logical Unit Unique Identifier", "A persistent binding remove request included a binding which did not match a binding established by the specified port", "A SCSI command was requested to an Nx_Port that was not a SCSI Target Port", "A request was made concerning an unsupported FC-4 protocol", "A request was made to enable unimplemented capabilities for a port", "SCSI target is busy", "A call was made to HBA_FreeLibrary when no library was loaded", "A call was made to HBA_LoadLibrary when a library was already loaded", "FCID passed into HBA_SendRNIDV2 violates access control rules"} : Amended ToSubclass] uint32 HBAStatus,[out] uint32 ResponseBufferSize,[out] uint32 SenseBufferSize,[out] uint8 ScsiStatus,[out] uint8 ResponseBuffer[],[out] uint8 SenseBuffer[]);
  void ScsiReadCapacity([in] uint8 Cdb[],[in] uint8 HbaPortWWN[],[in] uint8 DiscoveredPortWWN[],[in] uint64 FcLun,[out,Description("HBA Status result for the query operation") : Amended ToSubclass,Values{"Operation was successful ", "Error ", "Function not supported.", "invalid handle ", "Bad argument ", "WWN not recognized ", "Index not recognized ", "Larger buffer required ", "Information has changed since the last call to HBA_RefreshInformation ", "SCSI Check Condition reported", "Adapter busy or reserved, retry may be effective", "Request timed out, retry may be effective", "Referenced HBA has been removed or deactivated", "The requested ELS was rejected by the local adapter", "The specified LUN is not provided by the specified adapter", "An incompatibility has been detected among the library and driver modules", "Multiple adapters have a matching WWN", "A persistent binding request included a bad local SCSI bus number", "A persistent binding request included a bad local SCSI target number", "A persistent binding request included a bad local SCSI logical unit number", "A persistent binding set request included a local SCSI ID that was already bound", "A persistent binding request included a bad or unlocatable FCP Target FCID", "A persistent binding request included a bad FCP Target Node WWN", "A persistent binding request included a bad FCP Target Port WWN", "A persistent binding request included an FCP Logical Unit Number not defined by the identified Target", "A persistent binding request included an undefined or otherwise in accessible Logical Unit Unique Identifier", "A persistent binding remove request included a binding which did not match a binding established by the specified port", "A SCSI command was requested to an Nx_Port that was not a SCSI Target Port", "A request was made concerning an unsupported FC-4 protocol", "A request was made to enable unimplemented capabilities for a port", "SCSI target is busy", "A call was made to HBA_FreeLibrary when no library was loaded", "A call was made to HBA_LoadLibrary when a library was already loaded", "FCID passed into HBA_SendRNIDV2 violates access control rules"} : Amended ToSubclass] uint32 HBAStatus,[out] uint32 ResponseBufferSize,[out] uint32 SenseBufferSize,[out] uint8 ScsiStatus,[out] uint8 ResponseBuffer[],[out] uint8 SenseBuffer[]);
  void ScsiReportLuns([in] uint8 Cdb[],[in] uint8 HbaPortWWN[],[in] uint8 DiscoveredPortWWN[],[out,Description("HBA Status result for the query operation") : Amended ToSubclass,Values{"Operation was successful ", "Error ", "Function not supported.", "invalid handle ", "Bad argument ", "WWN not recognized ", "Index not recognized ", "Larger buffer required ", "Information has changed since the last call to HBA_RefreshInformation ", "SCSI Check Condition reported", "Adapter busy or reserved, retry may be effective", "Request timed out, retry may be effective", "Referenced HBA has been removed or deactivated", "The requested ELS was rejected by the local adapter", "The specified LUN is not provided by the specified adapter", "An incompatibility has been detected among the library and driver modules", "Multiple adapters have a matching WWN", "A persistent binding request included a bad local SCSI bus number", "A persistent binding request included a bad local SCSI target number", "A persistent binding request included a bad local SCSI logical unit number", "A persistent binding set request included a local SCSI ID that was already bound", "A persistent binding request included a bad or unlocatable FCP Target FCID", "A persistent binding request included a bad FCP Target Node WWN", "A persistent binding request included a bad FCP Target Port WWN", "A persistent binding request included an FCP Logical Unit Number not defined by the identified Target", "A persistent binding request included an undefined or otherwise in accessible Logical Unit Unique Identifier", "A persistent binding remove request included a binding which did not match a binding established by the specified port", "A SCSI command was requested to an Nx_Port that was not a SCSI Target Port", "A request was made concerning an unsupported FC-4 protocol", "A request was made to enable unimplemented capabilities for a port", "SCSI target is busy", "A call was made to HBA_FreeLibrary when no library was loaded", "A call was made to HBA_LoadLibrary when a library was already loaded", "FCID passed into HBA_SendRNIDV2 violates access control rules"} : Amended ToSubclass] uint32 HBAStatus,[out] uint32 ResponseBufferSize,[out] uint32 SenseBufferSize,[out] uint8 ScsiStatus,[out] uint8 ResponseBuffer[],[out] uint8 SenseBuffer[]);
  void GetEventBuffer([out,Description("HBA Status result for the query operation") : Amended ToSubclass,Values{"Operation was successful ", "Error ", "Function not supported.", "invalid handle ", "Bad argument ", "WWN not recognized ", "Index not recognized ", "Larger buffer required ", "Information has changed since the last call to HBA_RefreshInformation ", "SCSI Check Condition reported", "Adapter busy or reserved, retry may be effective", "Request timed out, retry may be effective", "Referenced HBA has been removed or deactivated", "The requested ELS was rejected by the local adapter", "The specified LUN is not provided by the specified adapter", "An incompatibility has been detected among the library and driver modules", "Multiple adapters have a matching WWN", "A persistent binding request included a bad local SCSI bus number", "A persistent binding request included a bad local SCSI target number", "A persistent binding request included a bad local SCSI logical unit number", "A persistent binding set request included a local SCSI ID that was already bound", "A persistent binding request included a bad or unlocatable FCP Target FCID", "A persistent binding request included a bad FCP Target Node WWN", "A persistent binding request included a bad FCP Target Port WWN", "A persistent binding request included an FCP Logical Unit Number not defined by the identified Target", "A persistent binding request included an undefined or otherwise in accessible Logical Unit Unique Identifier", "A persistent binding remove request included a binding which did not match a binding established by the specified port", "A SCSI command was requested to an Nx_Port that was not a SCSI Target Port", "A request was made concerning an unsupported FC-4 protocol", "A request was made to enable unimplemented capabilities for a port", "SCSI target is busy", "A call was made to HBA_FreeLibrary when no library was loaded", "A call was made to HBA_LoadLibrary when a library was already loaded", "FCID passed into HBA_SendRNIDV2 violates access control rules"} : Amended ToSubclass] uint32 HBAStatus,[out] uint32 EventCount,[out] MSFC_EventBuffer Events[]);
  void SendRLS([in] uint8 PortWWN[],[in] uint8 DestWWN[],[out,Description("HBA Status result for the query operation") : Amended ToSubclass,Values{"Operation was successful ", "Error ", "Function not supported.", "invalid handle ", "Bad argument ", "WWN not recognized ", "Index not recognized ", "Larger buffer required ", "Information has changed since the last call to HBA_RefreshInformation ", "SCSI Check Condition reported", "Adapter busy or reserved, retry may be effective", "Request timed out, retry may be effective", "Referenced HBA has been removed or deactivated", "The requested ELS was rejected by the local adapter", "The specified LUN is not provided by the specified adapter", "An incompatibility has been detected among the library and driver modules", "Multiple adapters have a matching WWN", "A persistent binding request included a bad local SCSI bus number", "A persistent binding request included a bad local SCSI target number", "A persistent binding request included a bad local SCSI logical unit number", "A persistent binding set request included a local SCSI ID that was already bound", "A persistent binding request included a bad or unlocatable FCP Target FCID", "A persistent binding request included a bad FCP Target Node WWN", "A persistent binding request included a bad FCP Target Port WWN", "A persistent binding request included an FCP Logical Unit Number not defined by the identified Target", "A persistent binding request included an undefined or otherwise in accessible Logical Unit Unique Identifier", "A persistent binding remove request included a binding which did not match a binding established by the specified port", "A SCSI command was requested to an Nx_Port that was not a SCSI Target Port", "A request was made concerning an unsupported FC-4 protocol", "A request was made to enable unimplemented capabilities for a port", "SCSI target is busy", "A call was made to HBA_FreeLibrary when no library was loaded", "A call was made to HBA_LoadLibrary when a library was already loaded", "FCID passed into HBA_SendRNIDV2 violates access control rules"} : Amended ToSubclass] uint32 HBAStatus,[out] uint32 TotalRspBufferSize,[out] uint32 ActualRspBufferSize,[out] uint8 RspBuffer[]);
};

[AMENDMENT, LOCALE(0x0c0a)] 
class HBAFCPBindingEntry
{
  [Values{"TO_D_ID", "TO_WWN", "TO_OTHER"} : Amended ToSubclass] uint32 Type;
};

[AMENDMENT, LOCALE(0x0c0a)] 
class HBAFCPBindingEntry2
{
  [Description("Formas de realizar un enlace persistente") : Amended ToSubclass] uint32 Type;
};

[Description("Esta clase muestra las operaciones asociadas con FCP en un adaptador de canal de fibra. Debe haber una instancia de esta clase para cada adaptador.") : Amended ToSubclass,AMENDMENT, LOCALE(0x0c0a)] 
class MSFC_HBAFCPInfo
{
  void GetFcpTargetMapping([in] uint8 HbaPortWWN[],[in] uint32 InEntryCount,[out,Description("HBA Status result for the query operation") : Amended ToSubclass,Values{"Operation was successful ", "Error ", "Function not supported.", "invalid handle ", "Bad argument ", "WWN not recognized ", "Index not recognized ", "Larger buffer required ", "Information has changed since the last call to HBA_RefreshInformation ", "SCSI Check Condition reported", "Adapter busy or reserved, retry may be effective", "Request timed out, retry may be effective", "Referenced HBA has been removed or deactivated", "The requested ELS was rejected by the local adapter", "The specified LUN is not provided by the specified adapter", "An incompatibility has been detected among the library and driver modules", "Multiple adapters have a matching WWN", "A persistent binding request included a bad local SCSI bus number", "A persistent binding request included a bad local SCSI target number", "A persistent binding request included a bad local SCSI logical unit number", "A persistent binding set request included a local SCSI ID that was already bound", "A persistent binding request included a bad or unlocatable FCP Target FCID", "A persistent binding request included a bad FCP Target Node WWN", "A persistent binding request included a bad FCP Target Port WWN", "A persistent binding request included an FCP Logical Unit Number not defined by the identified Target", "A persistent binding request included an undefined or otherwise in accessible Logical Unit Unique Identifier", "A persistent binding remove request included a binding which did not match a binding established by the specified port", "A SCSI command was requested to an Nx_Port that was not a SCSI Target Port", "A request was made concerning an unsupported FC-4 protocol", "A request was made to enable unimplemented capabilities for a port", "SCSI target is busy", "A call was made to HBA_FreeLibrary when no library was loaded", "A call was made to HBA_LoadLibrary when a library was already loaded", "FCID passed into HBA_SendRNIDV2 violates access control rules"} : Amended ToSubclass] uint32 HBAStatus,[out] uint32 TotalEntryCount,[out] uint32 OutEntryCount,[out] HBAFCPScsiEntry Entry[]);
  void GetFcpPersistentBinding([in] uint32 InEntryCount,[out,Description("HBA Status result for the query operation") : Amended ToSubclass,Values{"Operation was successful ", "Error ", "Function not supported.", "invalid handle ", "Bad argument ", "WWN not recognized ", "Index not recognized ", "Larger buffer required ", "Information has changed since the last call to HBA_RefreshInformation ", "SCSI Check Condition reported", "Adapter busy or reserved, retry may be effective", "Request timed out, retry may be effective", "Referenced HBA has been removed or deactivated", "The requested ELS was rejected by the local adapter", "The specified LUN is not provided by the specified adapter", "An incompatibility has been detected among the library and driver modules", "Multiple adapters have a matching WWN", "A persistent binding request included a bad local SCSI bus number", "A persistent binding request included a bad local SCSI target number", "A persistent binding request included a bad local SCSI logical unit number", "A persistent binding set request included a local SCSI ID that was already bound", "A persistent binding request included a bad or unlocatable FCP Target FCID", "A persistent binding request included a bad FCP Target Node WWN", "A persistent binding request included a bad FCP Target Port WWN", "A persistent binding request included an FCP Logical Unit Number not defined by the identified Target", "A persistent binding request included an undefined or otherwise in accessible Logical Unit Unique Identifier", "A persistent binding remove request included a binding which did not match a binding established by the specified port", "A SCSI command was requested to an Nx_Port that was not a SCSI Target Port", "A request was made concerning an unsupported FC-4 protocol", "A request was made to enable unimplemented capabilities for a port", "SCSI target is busy", "A call was made to HBA_FreeLibrary when no library was loaded", "A call was made to HBA_LoadLibrary when a library was already loaded", "FCID passed into HBA_SendRNIDV2 violates access control rules"} : Amended ToSubclass] uint32 HBAStatus,[out] uint32 TotalEntryCount,[out] uint32 OutEntryCount,[out] HBAFCPBindingEntry Entry[]);
  void GetBindingCapability([in] uint8 PortWWN[],[out,Description("HBA Status result for the query operation") : Amended ToSubclass,Values{"Operation was successful ", "Error ", "Function not supported.", "invalid handle ", "Bad argument ", "WWN not recognized ", "Index not recognized ", "Larger buffer required ", "Information has changed since the last call to HBA_RefreshInformation ", "SCSI Check Condition reported", "Adapter busy or reserved, retry may be effective", "Request timed out, retry may be effective", "Referenced HBA has been removed or deactivated", "The requested ELS was rejected by the local adapter", "The specified LUN is not provided by the specified adapter", "An incompatibility has been detected among the library and driver modules", "Multiple adapters have a matching WWN", "A persistent binding request included a bad local SCSI bus number", "A persistent binding request included a bad local SCSI target number", "A persistent binding request included a bad local SCSI logical unit number", "A persistent binding set request included a local SCSI ID that was already bound", "A persistent binding request included a bad or unlocatable FCP Target FCID", "A persistent binding request included a bad FCP Target Node WWN", "A persistent binding request included a bad FCP Target Port WWN", "A persistent binding request included an FCP Logical Unit Number not defined by the identified Target", "A persistent binding request included an undefined or otherwise in accessible Logical Unit Unique Identifier", "A persistent binding remove request included a binding which did not match a binding established by the specified port", "A SCSI command was requested to an Nx_Port that was not a SCSI Target Port", "A request was made concerning an unsupported FC-4 protocol", "A request was made to enable unimplemented capabilities for a port", "SCSI target is busy", "A call was made to HBA_FreeLibrary when no library was loaded", "A call was made to HBA_LoadLibrary when a library was already loaded", "FCID passed into HBA_SendRNIDV2 violates access control rules"} : Amended ToSubclass] uint32 HBAStatus,[out,Description("Ways of performing persistent binding") : Amended ToSubclass] uint32 BindType);
  void GetBindingSupport([in] uint8 PortWWN[],[out,Description("HBA Status result for the query operation") : Amended ToSubclass,Values{"Operation was successful ", "Error ", "Function not supported.", "invalid handle ", "Bad argument ", "WWN not recognized ", "Index not recognized ", "Larger buffer required ", "Information has changed since the last call to HBA_RefreshInformation ", "SCSI Check Condition reported", "Adapter busy or reserved, retry may be effective", "Request timed out, retry may be effective", "Referenced HBA has been removed or deactivated", "The requested ELS was rejected by the local adapter", "The specified LUN is not provided by the specified adapter", "An incompatibility has been detected among the library and driver modules", "Multiple adapters have a matching WWN", "A persistent binding request included a bad local SCSI bus number", "A persistent binding request included a bad local SCSI target number", "A persistent binding request included a bad local SCSI logical unit number", "A persistent binding set request included a local SCSI ID that was already bound", "A persistent binding request included a bad or unlocatable FCP Target FCID", "A persistent binding request included a bad FCP Target Node WWN", "A persistent binding request included a bad FCP Target Port WWN", "A persistent binding request included an FCP Logical Unit Number not defined by the identified Target", "A persistent binding request included an undefined or otherwise in accessible Logical Unit Unique Identifier", "A persistent binding remove request included a binding which did not match a binding established by the specified port", "A SCSI command was requested to an Nx_Port that was not a SCSI Target Port", "A request was made concerning an unsupported FC-4 protocol", "A request was made to enable unimplemented capabilities for a port", "SCSI target is busy", "A call was made to HBA_FreeLibrary when no library was loaded", "A call was made to HBA_LoadLibrary when a library was already loaded", "FCID passed into HBA_SendRNIDV2 violates access control rules"} : Amended ToSubclass] uint32 HBAStatus,[out,Description("Ways of performing persistent binding") : Amended ToSubclass] uint32 BindType);
  void SetBindingSupport([in] uint8 PortWWN[],[in,Description("Ways of performing persistent binding") : Amended ToSubclass] uint32 BindType,[out,Description("HBA Status result for the query operation") : Amended ToSubclass,Values{"Operation was successful ", "Error ", "Function not supported.", "invalid handle ", "Bad argument ", "WWN not recognized ", "Index not recognized ", "Larger buffer required ", "Information has changed since the last call to HBA_RefreshInformation ", "SCSI Check Condition reported", "Adapter busy or reserved, retry may be effective", "Request timed out, retry may be effective", "Referenced HBA has been removed or deactivated", "The requested ELS was rejected by the local adapter", "The specified LUN is not provided by the specified adapter", "An incompatibility has been detected among the library and driver modules", "Multiple adapters have a matching WWN", "A persistent binding request included a bad local SCSI bus number", "A persistent binding request included a bad local SCSI target number", "A persistent binding request included a bad local SCSI logical unit number", "A persistent binding set request included a local SCSI ID that was already bound", "A persistent binding request included a bad or unlocatable FCP Target FCID", "A persistent binding request included a bad FCP Target Node WWN", "A persistent binding request included a bad FCP Target Port WWN", "A persistent binding request included an FCP Logical Unit Number not defined by the identified Target", "A persistent binding request included an undefined or otherwise in accessible Logical Unit Unique Identifier", "A persistent binding remove request included a binding which did not match a binding established by the specified port", "A SCSI command was requested to an Nx_Port that was not a SCSI Target Port", "A request was made concerning an unsupported FC-4 protocol", "A request was made to enable unimplemented capabilities for a port", "SCSI target is busy", "A call was made to HBA_FreeLibrary when no library was loaded", "A call was made to HBA_LoadLibrary when a library was already loaded", "FCID passed into HBA_SendRNIDV2 violates access control rules"} : Amended ToSubclass] uint32 HBAStatus);
  void GetPersistentBinding2([in] uint8 PortWWN[],[in] uint32 InEntryCount,[out,Description("HBA Status result for the query operation") : Amended ToSubclass,Values{"Operation was successful ", "Error ", "Function not supported.", "invalid handle ", "Bad argument ", "WWN not recognized ", "Index not recognized ", "Larger buffer required ", "Information has changed since the last call to HBA_RefreshInformation ", "SCSI Check Condition reported", "Adapter busy or reserved, retry may be effective", "Request timed out, retry may be effective", "Referenced HBA has been removed or deactivated", "The requested ELS was rejected by the local adapter", "The specified LUN is not provided by the specified adapter", "An incompatibility has been detected among the library and driver modules", "Multiple adapters have a matching WWN", "A persistent binding request included a bad local SCSI bus number", "A persistent binding request included a bad local SCSI target number", "A persistent binding request included a bad local SCSI logical unit number", "A persistent binding set request included a local SCSI ID that was already bound", "A persistent binding request included a bad or unlocatable FCP Target FCID", "A persistent binding request included a bad FCP Target Node WWN", "A persistent binding request included a bad FCP Target Port WWN", "A persistent binding request included an FCP Logical Unit Number not defined by the identified Target", "A persistent binding request included an undefined or otherwise in accessible Logical Unit Unique Identifier", "A persistent binding remove request included a binding which did not match a binding established by the specified port", "A SCSI command was requested to an Nx_Port that was not a SCSI Target Port", "A request was made concerning an unsupported FC-4 protocol", "A request was made to enable unimplemented capabilities for a port", "SCSI target is busy", "A call was made to HBA_FreeLibrary when no library was loaded", "A call was made to HBA_LoadLibrary when a library was already loaded", "FCID passed into HBA_SendRNIDV2 violates access control rules"} : Amended ToSubclass] uint32 HBAStatus,[out] uint32 TotalEntryCount,[out] uint32 OutEntryCount,[out] HBAFCPBindingEntry2 Bindings[]);
  void SetPersistentEntry([in] uint8 PortWWN[],[in] HBAFCPBindingEntry2 Binding,[out,Description("HBA Status result for the query operation") : Amended ToSubclass,Values{"Operation was successful ", "Error ", "Function not supported.", "invalid handle ", "Bad argument ", "WWN not recognized ", "Index not recognized ", "Larger buffer required ", "Information has changed since the last call to HBA_RefreshInformation ", "SCSI Check Condition reported", "Adapter busy or reserved, retry may be effective", "Request timed out, retry may be effective", "Referenced HBA has been removed or deactivated", "The requested ELS was rejected by the local adapter", "The specified LUN is not provided by the specified adapter", "An incompatibility has been detected among the library and driver modules", "Multiple adapters have a matching WWN", "A persistent binding request included a bad local SCSI bus number", "A persistent binding request included a bad local SCSI target number", "A persistent binding request included a bad local SCSI logical unit number", "A persistent binding set request included a local SCSI ID that was already bound", "A persistent binding request included a bad or unlocatable FCP Target FCID", "A persistent binding request included a bad FCP Target Node WWN", "A persistent binding request included a bad FCP Target Port WWN", "A persistent binding request included an FCP Logical Unit Number not defined by the identified Target", "A persistent binding request included an undefined or otherwise in accessible Logical Unit Unique Identifier", "A persistent binding remove request included a binding which did not match a binding established by the specified port", "A SCSI command was requested to an Nx_Port that was not a SCSI Target Port", "A request was made concerning an unsupported FC-4 protocol", "A request was made to enable unimplemented capabilities for a port", "SCSI target is busy", "A call was made to HBA_FreeLibrary when no library was loaded", "A call was made to HBA_LoadLibrary when a library was already loaded", "FCID passed into HBA_SendRNIDV2 violates access control rules"} : Amended ToSubclass] uint32 HBAStatus);
  void RemovePersistentEntry([in] uint8 PortWWN[],[in] HBAFCPBindingEntry2 Binding,[out,Description("HBA Status result for the query operation") : Amended ToSubclass,Values{"Operation was successful ", "Error ", "Function not supported.", "invalid handle ", "Bad argument ", "WWN not recognized ", "Index not recognized ", "Larger buffer required ", "Information has changed since the last call to HBA_RefreshInformation ", "SCSI Check Condition reported", "Adapter busy or reserved, retry may be effective", "Request timed out, retry may be effective", "Referenced HBA has been removed or deactivated", "The requested ELS was rejected by the local adapter", "The specified LUN is not provided by the specified adapter", "An incompatibility has been detected among the library and driver modules", "Multiple adapters have a matching WWN", "A persistent binding request included a bad local SCSI bus number", "A persistent binding request included a bad local SCSI target number", "A persistent binding request included a bad local SCSI logical unit number", "A persistent binding set request included a local SCSI ID that was already bound", "A persistent binding request included a bad or unlocatable FCP Target FCID", "A persistent binding request included a bad FCP Target Node WWN", "A persistent binding request included a bad FCP Target Port WWN", "A persistent binding request included an FCP Logical Unit Number not defined by the identified Target", "A persistent binding request included an undefined or otherwise in accessible Logical Unit Unique Identifier", "A persistent binding remove request included a binding which did not match a binding established by the specified port", "A SCSI command was requested to an Nx_Port that was not a SCSI Target Port", "A request was made concerning an unsupported FC-4 protocol", "A request was made to enable unimplemented capabilities for a port", "SCSI target is busy", "A call was made to HBA_FreeLibrary when no library was loaded", "A call was made to HBA_LoadLibrary when a library was already loaded", "FCID passed into HBA_SendRNIDV2 violates access control rules"} : Amended ToSubclass] uint32 HBAStatus);
};

[Description("Esta clase muestra eventos de adaptador HBA") : Amended ToSubclass,AMENDMENT, LOCALE(0x0c0a)] 
class MSFC_AdapterEvent : WMIEvent
{
  [Description("Tipo de evento") : Amended ToSubclass] uint32 EventType;
  [Description("WWN de adaptador") : Amended ToSubclass] uint8 PortWWN[];
};

[Description("Esta clase muestra eventos de puertos HBA") : Amended ToSubclass,AMENDMENT, LOCALE(0x0c0a)] 
class MSFC_PortEvent : WMIEvent
{
  [Description("Tipo de evento") : Amended ToSubclass,Values{"HBA_EVENT_ADAPTER_UNKNOWN", "HBA_EVENT_ADAPTER_ADD", "HBA_EVENT_ADAPTER_REMOVE", "HBA_EVENT_ADAPTER_CHANGE", "HBA_EVENT_PORT_UNKNOWN", "HBA_EVENT_PORT_OFFLINE", "HBA_EVENT_PORT_ONLINE", "HBA_EVENT_PORT_NEW_TARGETS", "HBA_EVENT_PORT_FABRIC", "HBA_EVENT_PORT_BROADCAST_CHANGE", "HBA_EVENT_PORT_BROADCAST_D24_0", "HBA_EVENT_PORT_BROADCAST_D27_4", "HBA_EVENT_PORT_BROADCAST_SES", "HBA_EVENT_PORT_BROADCAST_D01_4", "HBA_EVENT_PORT_BROADCAST_D04_7", "HBA_EVENT_PORT_BROADCAST_D16_7", "HBA_EVENT_PORT_BROADCAST_D29_7", "HBA_EVENT_PORT_ALL", "HBA_EVENT_PORT_STAT_THRESHOLD", "HBA_EVENT_PORT_STAT_GROWTH", "HBA_EVENT_PHY_STAT_THRESHOLD", "HBA_EVENT_PHY_STAT_GROWTH", "HBA_EVENT_TARGET_UNKNOWN", "HBA_EVENT_TARGET_OFFLINE", "HBA_EVENT_TARGET_ONLINE", "HBA_EVENT_TARGET_REMOVED", "HBA_EVENT_LINK_UNKNOWN", "HBA_EVENT_LINK_INCIDENT"} : Amended ToSubclass] uint32 EventType;
  [Description("Id. de puerto tejido") : Amended ToSubclass] uint32 FabricPortId;
  [Description("WWN de puerto") : Amended ToSubclass] uint8 PortWWN[];
};

[Description("Esta clase muestra eventos de destinos HBA") : Amended ToSubclass,AMENDMENT, LOCALE(0x0c0a)] 
class MSFC_TargetEvent : WmiEvent
{
  [Description("Tipo de evento") : Amended ToSubclass,Values{"HBA_EVENT_ADAPTER_UNKNOWN", "HBA_EVENT_ADAPTER_ADD", "HBA_EVENT_ADAPTER_REMOVE", "HBA_EVENT_ADAPTER_CHANGE", "HBA_EVENT_PORT_UNKNOWN", "HBA_EVENT_PORT_OFFLINE", "HBA_EVENT_PORT_ONLINE", "HBA_EVENT_PORT_NEW_TARGETS", "HBA_EVENT_PORT_FABRIC", "HBA_EVENT_PORT_BROADCAST_CHANGE", "HBA_EVENT_PORT_BROADCAST_D24_0", "HBA_EVENT_PORT_BROADCAST_D27_4", "HBA_EVENT_PORT_BROADCAST_SES", "HBA_EVENT_PORT_BROADCAST_D01_4", "HBA_EVENT_PORT_BROADCAST_D04_7", "HBA_EVENT_PORT_BROADCAST_D16_7", "HBA_EVENT_PORT_BROADCAST_D29_7", "HBA_EVENT_PORT_ALL", "HBA_EVENT_PORT_STAT_THRESHOLD", "HBA_EVENT_PORT_STAT_GROWTH", "HBA_EVENT_PHY_STAT_THRESHOLD", "HBA_EVENT_PHY_STAT_GROWTH", "HBA_EVENT_TARGET_UNKNOWN", "HBA_EVENT_TARGET_OFFLINE", "HBA_EVENT_TARGET_ONLINE", "HBA_EVENT_TARGET_REMOVED", "HBA_EVENT_LINK_UNKNOWN", "HBA_EVENT_LINK_INCIDENT"} : Amended ToSubclass] uint32 EventType;
  [Description("WWN de puerto") : Amended ToSubclass] uint8 PortWWN[];
  [Description("Puerto WWN detectado") : Amended ToSubclass] uint8 DiscoveredPortWWN[];
};

[Description("Esta clase define los umbrales de estadísticas de puerto que harán que se produzca un evento HBA_EVENT_PORT_STAT_THRESHOLD") : Amended ToSubclass,AMENDMENT, LOCALE(0x0c0a)] 
class MSFC_EventControl
{
  void AddTarget([in] uint8 HbaPortWWN[],[in] uint8 DiscoveredPortWWN[],[in] uint32 AllTargets,[out,Description("HBA Status result for the query operation") : Amended ToSubclass,Values{"Operation was successful ", "Error ", "Function not supported.", "invalid handle ", "Bad argument ", "WWN not recognized ", "Index not recognized ", "Larger buffer required ", "Information has changed since the last call to HBA_RefreshInformation ", "SCSI Check Condition reported", "Adapter busy or reserved, retry may be effective", "Request timed out, retry may be effective", "Referenced HBA has been removed or deactivated", "The requested ELS was rejected by the local adapter", "The specified LUN is not provided by the specified adapter", "An incompatibility has been detected among the library and driver modules", "Multiple adapters have a matching WWN", "A persistent binding request included a bad local SCSI bus number", "A persistent binding request included a bad local SCSI target number", "A persistent binding request included a bad local SCSI logical unit number", "A persistent binding set request included a local SCSI ID that was already bound", "A persistent binding request included a bad or unlocatable FCP Target FCID", "A persistent binding request included a bad FCP Target Node WWN", "A persistent binding request included a bad FCP Target Port WWN", "A persistent binding request included an FCP Logical Unit Number not defined by the identified Target", "A persistent binding request included an undefined or otherwise in accessible Logical Unit Unique Identifier", "A persistent binding remove request included a binding which did not match a binding established by the specified port", "A SCSI command was requested to an Nx_Port that was not a SCSI Target Port", "A request was made concerning an unsupported FC-4 protocol", "A request was made to enable unimplemented capabilities for a port", "SCSI target is busy", "A call was made to HBA_FreeLibrary when no library was loaded", "A call was made to HBA_LoadLibrary when a library was already loaded", "FCID passed into HBA_SendRNIDV2 violates access control rules"} : Amended ToSubclass] uint32 HBAStatus);
  void RemoveTarget([in] uint8 HbaPortWWN[],[in] uint8 DiscoveredPortWWN[],[in] uint32 AllTargets,[out,Description("HBA Status result for the query operation") : Amended ToSubclass,Values{"Operation was successful ", "Error ", "Function not supported.", "invalid handle ", "Bad argument ", "WWN not recognized ", "Index not recognized ", "Larger buffer required ", "Information has changed since the last call to HBA_RefreshInformation ", "SCSI Check Condition reported", "Adapter busy or reserved, retry may be effective", "Request timed out, retry may be effective", "Referenced HBA has been removed or deactivated", "The requested ELS was rejected by the local adapter", "The specified LUN is not provided by the specified adapter", "An incompatibility has been detected among the library and driver modules", "Multiple adapters have a matching WWN", "A persistent binding request included a bad local SCSI bus number", "A persistent binding request included a bad local SCSI target number", "A persistent binding request included a bad local SCSI logical unit number", "A persistent binding set request included a local SCSI ID that was already bound", "A persistent binding request included a bad or unlocatable FCP Target FCID", "A persistent binding request included a bad FCP Target Node WWN", "A persistent binding request included a bad FCP Target Port WWN", "A persistent binding request included an FCP Logical Unit Number not defined by the identified Target", "A persistent binding request included an undefined or otherwise in accessible Logical Unit Unique Identifier", "A persistent binding remove request included a binding which did not match a binding established by the specified port", "A SCSI command was requested to an Nx_Port that was not a SCSI Target Port", "A request was made concerning an unsupported FC-4 protocol", "A request was made to enable unimplemented capabilities for a port", "SCSI target is busy", "A call was made to HBA_FreeLibrary when no library was loaded", "A call was made to HBA_LoadLibrary when a library was already loaded", "FCID passed into HBA_SendRNIDV2 violates access control rules"} : Amended ToSubclass] uint32 HBAStatus);
  void AddPort([in] uint8 PortWWN[],[out,Description("HBA Status result for the query operation") : Amended ToSubclass,Values{"Operation was successful ", "Error ", "Function not supported.", "invalid handle ", "Bad argument ", "WWN not recognized ", "Index not recognized ", "Larger buffer required ", "Information has changed since the last call to HBA_RefreshInformation ", "SCSI Check Condition reported", "Adapter busy or reserved, retry may be effective", "Request timed out, retry may be effective", "Referenced HBA has been removed or deactivated", "The requested ELS was rejected by the local adapter", "The specified LUN is not provided by the specified adapter", "An incompatibility has been detected among the library and driver modules", "Multiple adapters have a matching WWN", "A persistent binding request included a bad local SCSI bus number", "A persistent binding request included a bad local SCSI target number", "A persistent binding request included a bad local SCSI logical unit number", "A persistent binding set request included a local SCSI ID that was already bound", "A persistent binding request included a bad or unlocatable FCP Target FCID", "A persistent binding request included a bad FCP Target Node WWN", "A persistent binding request included a bad FCP Target Port WWN", "A persistent binding request included an FCP Logical Unit Number not defined by the identified Target", "A persistent binding request included an undefined or otherwise in accessible Logical Unit Unique Identifier", "A persistent binding remove request included a binding which did not match a binding established by the specified port", "A SCSI command was requested to an Nx_Port that was not a SCSI Target Port", "A request was made concerning an unsupported FC-4 protocol", "A request was made to enable unimplemented capabilities for a port", "SCSI target is busy", "A call was made to HBA_FreeLibrary when no library was loaded", "A call was made to HBA_LoadLibrary when a library was already loaded", "FCID passed into HBA_SendRNIDV2 violates access control rules"} : Amended ToSubclass] uint32 HBAStatus);
  void RemovePort([in] uint8 PortWWN[],[out,Description("HBA Status result for the query operation") : Amended ToSubclass,Values{"Operation was successful ", "Error ", "Function not supported.", "invalid handle ", "Bad argument ", "WWN not recognized ", "Index not recognized ", "Larger buffer required ", "Information has changed since the last call to HBA_RefreshInformation ", "SCSI Check Condition reported", "Adapter busy or reserved, retry may be effective", "Request timed out, retry may be effective", "Referenced HBA has been removed or deactivated", "The requested ELS was rejected by the local adapter", "The specified LUN is not provided by the specified adapter", "An incompatibility has been detected among the library and driver modules", "Multiple adapters have a matching WWN", "A persistent binding request included a bad local SCSI bus number", "A persistent binding request included a bad local SCSI target number", "A persistent binding request included a bad local SCSI logical unit number", "A persistent binding set request included a local SCSI ID that was already bound", "A persistent binding request included a bad or unlocatable FCP Target FCID", "A persistent binding request included a bad FCP Target Node WWN", "A persistent binding request included a bad FCP Target Port WWN", "A persistent binding request included an FCP Logical Unit Number not defined by the identified Target", "A persistent binding request included an undefined or otherwise in accessible Logical Unit Unique Identifier", "A persistent binding remove request included a binding which did not match a binding established by the specified port", "A SCSI command was requested to an Nx_Port that was not a SCSI Target Port", "A request was made concerning an unsupported FC-4 protocol", "A request was made to enable unimplemented capabilities for a port", "SCSI target is busy", "A call was made to HBA_FreeLibrary when no library was loaded", "A call was made to HBA_LoadLibrary when a library was already loaded", "FCID passed into HBA_SendRNIDV2 violates access control rules"} : Amended ToSubclass] uint32 HBAStatus);
  void AddLink([out,Description("HBA Status result for the query operation") : Amended ToSubclass,Values{"Operation was successful ", "Error ", "Function not supported.", "invalid handle ", "Bad argument ", "WWN not recognized ", "Index not recognized ", "Larger buffer required ", "Information has changed since the last call to HBA_RefreshInformation ", "SCSI Check Condition reported", "Adapter busy or reserved, retry may be effective", "Request timed out, retry may be effective", "Referenced HBA has been removed or deactivated", "The requested ELS was rejected by the local adapter", "The specified LUN is not provided by the specified adapter", "An incompatibility has been detected among the library and driver modules", "Multiple adapters have a matching WWN", "A persistent binding request included a bad local SCSI bus number", "A persistent binding request included a bad local SCSI target number", "A persistent binding request included a bad local SCSI logical unit number", "A persistent binding set request included a local SCSI ID that was already bound", "A persistent binding request included a bad or unlocatable FCP Target FCID", "A persistent binding request included a bad FCP Target Node WWN", "A persistent binding request included a bad FCP Target Port WWN", "A persistent binding request included an FCP Logical Unit Number not defined by the identified Target", "A persistent binding request included an undefined or otherwise in accessible Logical Unit Unique Identifier", "A persistent binding remove request included a binding which did not match a binding established by the specified port", "A SCSI command was requested to an Nx_Port that was not a SCSI Target Port", "A request was made concerning an unsupported FC-4 protocol", "A request was made to enable unimplemented capabilities for a port", "SCSI target is busy", "A call was made to HBA_FreeLibrary when no library was loaded", "A call was made to HBA_LoadLibrary when a library was already loaded", "FCID passed into HBA_SendRNIDV2 violates access control rules"} : Amended ToSubclass] uint32 HBAStatus);
  void RemoveLink([out,Description("HBA Status result for the query operation") : Amended ToSubclass,Values{"Operation was successful ", "Error ", "Function not supported.", "invalid handle ", "Bad argument ", "WWN not recognized ", "Index not recognized ", "Larger buffer required ", "Information has changed since the last call to HBA_RefreshInformation ", "SCSI Check Condition reported", "Adapter busy or reserved, retry may be effective", "Request timed out, retry may be effective", "Referenced HBA has been removed or deactivated", "The requested ELS was rejected by the local adapter", "The specified LUN is not provided by the specified adapter", "An incompatibility has been detected among the library and driver modules", "Multiple adapters have a matching WWN", "A persistent binding request included a bad local SCSI bus number", "A persistent binding request included a bad local SCSI target number", "A persistent binding request included a bad local SCSI logical unit number", "A persistent binding set request included a local SCSI ID that was already bound", "A persistent binding request included a bad or unlocatable FCP Target FCID", "A persistent binding request included a bad FCP Target Node WWN", "A persistent binding request included a bad FCP Target Port WWN", "A persistent binding request included an FCP Logical Unit Number not defined by the identified Target", "A persistent binding request included an undefined or otherwise in accessible Logical Unit Unique Identifier", "A persistent binding remove request included a binding which did not match a binding established by the specified port", "A SCSI command was requested to an Nx_Port that was not a SCSI Target Port", "A request was made concerning an unsupported FC-4 protocol", "A request was made to enable unimplemented capabilities for a port", "SCSI target is busy", "A call was made to HBA_FreeLibrary when no library was loaded", "A call was made to HBA_LoadLibrary when a library was already loaded", "FCID passed into HBA_SendRNIDV2 violates access control rules"} : Amended ToSubclass] uint32 HBAStatus);
};

[Description("Esta clase muestra los atributos del adaptador SM-HBA. Incluirá el número de puertos de este adaptador.") : Amended ToSubclass,AMENDMENT, LOCALE(0x0c0a)] 
class MS_SM_AdapterInformationQuery
{
  [Description("Identificador único para el adaptador. Este identificador debe ser único entre todos los adaptadores. Se debe usar el mismo valor para el identificador en otras clases que muestren información del adaptador") : Amended ToSubclass] uint64 UniqueAdapterId;
  [Description("Resultado del Estado de HBA para la operación de consulta") : Amended ToSubclass,Values{"La operación se realizó correctamente ", "Error ", "Función no admitida.", "Identificador no válido ", "Argumento incorrecto ", "WWN no reconocido ", "Índice no reconocido ", "Se requiere un búfer más grande ", "La información cambió desde la última llamada a HBA_RefreshInformation ", "Condición de comprobación de SCSI notificada", "Adaptador ocupado o reservado; inténtelo de nuevo", "Se agotó el tiempo de espera de la solicitud; inténtelo de nuevo", "Se quitó o desactivó un HBA al que se hace referencia", "El adaptador local rechazó el ELS solicitado", "El adaptador especificado no proporciona el LUN especificado", "Se detectó una incompatibilidad entre los módulos de controlador y la biblioteca", "Hay varios adaptadores con un WWN coincidente", "Una solicitud de enlace persistente incluía un número de bus SCSI local incorrecto", "Una solicitud de enlace persistente incluía un número de destino SCSI local incorrecto", "Una solicitud de enlace persistente incluía un número de unidad lógica SCSI local incorrecto", "Una solicitud de establecimiento de enlace persistente incluía un identificador de SCSI local ya enlazado", "Una solicitud de enlace persistente incluía un identificador de FC de destino de FCP incorrecto o que no se encuentra", "Una solicitud de enlace persistente incluía un WWN de nodo de destino de FCP incorrecto", "Una solicitud de enlace persistente incluía un WWN de puerto de destino de FCP incorrecto", "Una solicitud de enlace persistente incluía un número de unidad lógica de FCP no definido por el destino identificado", "Una solicitud de enlace persistente incluía un identificador único de unidad lógica no definido o inaccesible", "Una solicitud de eliminación de enlace persistente incluía un enlace que no coincidía con uno establecido por el puerto especificado", "Se solicitó un comando SCSI para un Nx_Port que no era un puerto de destino SCSI", "Se realizó una solicitud sobre un protocolo FC-4 no admitido", "Se realizó una solicitud para habilitar las capacidades no implementadas para un puerto", "El destino SCSI está ocupado", "Se llamó a HBA_FreeLibrary cuando no se cargó ninguna biblioteca", "Se llamó a HBA_LoadLibrary cuando ya había una biblioteca cargada", "El FCID pasado a HBA_SendRNIDV2 infringe las reglas de control de acceso"} : Amended ToSubclass] uint32 HBAStatus;
};

[Description("Esta clase son los atributos FC_Port") : Amended ToSubclass,AMENDMENT, LOCALE(0x0c0a)] 
class MS_SMHBA_FC_Port
{
};

[Description("Esta clase son los atributos SAS_Port") : Amended ToSubclass,AMENDMENT, LOCALE(0x0c0a)] 
class MS_SMHBA_SAS_Port
{
};

[AMENDMENT, LOCALE(0x0c0a)] 
class MS_SMHBA_PORTATTRIBUTES
{
  [Values{"Desconocido", "Otros", "Ausente", "Tejido", "Bucle público", "HBA_PORTTYPE_FLPORT", "Puerto tejido", "Puerto de expansión de tejido", "Puerto tejido genérico", "Bucle privado", "Punto a punto", "SAS (SSP o STP)", "SATA (conexión directa)", "Ampliador SAS"} : Amended ToSubclass] uint32 PortType;
  [Values{"Desconocido", "Operativo", "Usuario sin conexión", "Omitido", "En modo de diagnóstico", "Vínculo inactivo", "Error de puerto", "Bucle invertido", "Degradado"} : Amended ToSubclass] uint32 PortState;
  [Description("Tamaño de MS_SMHBA_SAS_Port o MS_SMHBA_FC_Port") : Amended ToSubclass] uint32 PortSpecificAttributesSize;
  [Description(" Búfer de MS_SMHBA_SAS_Port o MS_SMHBA_FC_Port") : Amended ToSubclass] uint8 PortSpecificAttributes[];
};

[Description("Esta clase muestra operaciones de información de puerto que se pueden determinar desde el adaptador. Debe haber una instancia de esta clase para cada adaptador") : Amended ToSubclass,AMENDMENT, LOCALE(0x0c0a)] 
class MS_SM_PortInformationMethods
{
  void SM_GetPortType([in] uint32 PortIndex,[out,Description("HBA Status result for the query operation") : Amended ToSubclass,Values{"Operation was successful ", "Error ", "Function not supported.", "invalid handle ", "Bad argument ", "WWN not recognized ", "Index not recognized ", "Larger buffer required ", "Information has changed since the last call to HBA_RefreshInformation ", "SCSI Check Condition reported", "Adapter busy or reserved, retry may be effective", "Request timed out, retry may be effective", "Referenced HBA has been removed or deactivated", "The requested ELS was rejected by the local adapter", "The specified LUN is not provided by the specified adapter", "An incompatibility has been detected among the library and driver modules", "Multiple adapters have a matching WWN", "A persistent binding request included a bad local SCSI bus number", "A persistent binding request included a bad local SCSI target number", "A persistent binding request included a bad local SCSI logical unit number", "A persistent binding set request included a local SCSI ID that was already bound", "A persistent binding request included a bad or unlocatable FCP Target FCID", "A persistent binding request included a bad FCP Target Node WWN", "A persistent binding request included a bad FCP Target Port WWN", "A persistent binding request included an FCP Logical Unit Number not defined by the identified Target", "A persistent binding request included an undefined or otherwise in accessible Logical Unit Unique Identifier", "A persistent binding remove request included a binding which did not match a binding established by the specified port", "A SCSI command was requested to an Nx_Port that was not a SCSI Target Port", "A request was made concerning an unsupported FC-4 protocol", "A request was made to enable unimplemented capabilities for a port", "SCSI target is busy", "A call was made to HBA_FreeLibrary when no library was loaded", "A call was made to HBA_LoadLibrary when a library was already loaded", "FCID passed into HBA_SendRNIDV2 violates access control rules"} : Amended ToSubclass] uint32 HBAStatus,[out,Values{"Unknown", "Other", "Not present", "Fabric", "Public Loop", "HBA_PORTTYPE_FLPORT", "Fabric Port", "Fabric expansion port", "Generic Fabric Port", "Private Loop", "Point to Point", "SAS (SSP or STP)", "SATA (Direct Attach)", "SAS Expander"} : Amended ToSubclass] uint32 PortType);
  void SM_GetAdapterPortAttributes([in] uint32 PortIndex,[in] uint32 PortSpecificAttributesMaxSize,[out,Description("HBA Status result for the query operation") : Amended ToSubclass,Values{"Operation was successful ", "Error ", "Function not supported.", "invalid handle ", "Bad argument ", "WWN not recognized ", "Index not recognized ", "Larger buffer required ", "Information has changed since the last call to HBA_RefreshInformation ", "SCSI Check Condition reported", "Adapter busy or reserved, retry may be effective", "Request timed out, retry may be effective", "Referenced HBA has been removed or deactivated", "The requested ELS was rejected by the local adapter", "The specified LUN is not provided by the specified adapter", "An incompatibility has been detected among the library and driver modules", "Multiple adapters have a matching WWN", "A persistent binding request included a bad local SCSI bus number", "A persistent binding request included a bad local SCSI target number", "A persistent binding request included a bad local SCSI logical unit number", "A persistent binding set request included a local SCSI ID that was already bound", "A persistent binding request included a bad or unlocatable FCP Target FCID", "A persistent binding request included a bad FCP Target Node WWN", "A persistent binding request included a bad FCP Target Port WWN", "A persistent binding request included an FCP Logical Unit Number not defined by the identified Target", "A persistent binding request included an undefined or otherwise in accessible Logical Unit Unique Identifier", "A persistent binding remove request included a binding which did not match a binding established by the specified port", "A SCSI command was requested to an Nx_Port that was not a SCSI Target Port", "A request was made concerning an unsupported FC-4 protocol", "A request was made to enable unimplemented capabilities for a port", "SCSI target is busy", "A call was made to HBA_FreeLibrary when no library was loaded", "A call was made to HBA_LoadLibrary when a library was already loaded", "FCID passed into HBA_SendRNIDV2 violates access control rules"} : Amended ToSubclass] uint32 HBAStatus,[out] MS_SMHBA_PORTATTRIBUTES PortAttributes);
  void SM_GetDiscoveredPortAttributes([in] uint32 PortIndex,[in] uint32 DiscoveredPortIndex,[in] uint32 PortSpecificAttributesMaxSize,[out,Description("HBA Status result for the query operation") : Amended ToSubclass,Values{"Operation was successful ", "Error ", "Function not supported.", "invalid handle ", "Bad argument ", "WWN not recognized ", "Index not recognized ", "Larger buffer required ", "Information has changed since the last call to HBA_RefreshInformation ", "SCSI Check Condition reported", "Adapter busy or reserved, retry may be effective", "Request timed out, retry may be effective", "Referenced HBA has been removed or deactivated", "The requested ELS was rejected by the local adapter", "The specified LUN is not provided by the specified adapter", "An incompatibility has been detected among the library and driver modules", "Multiple adapters have a matching WWN", "A persistent binding request included a bad local SCSI bus number", "A persistent binding request included a bad local SCSI target number", "A persistent binding request included a bad local SCSI logical unit number", "A persistent binding set request included a local SCSI ID that was already bound", "A persistent binding request included a bad or unlocatable FCP Target FCID", "A persistent binding request included a bad FCP Target Node WWN", "A persistent binding request included a bad FCP Target Port WWN", "A persistent binding request included an FCP Logical Unit Number not defined by the identified Target", "A persistent binding request included an undefined or otherwise in accessible Logical Unit Unique Identifier", "A persistent binding remove request included a binding which did not match a binding established by the specified port", "A SCSI command was requested to an Nx_Port that was not a SCSI Target Port", "A request was made concerning an unsupported FC-4 protocol", "A request was made to enable unimplemented capabilities for a port", "SCSI target is busy", "A call was made to HBA_FreeLibrary when no library was loaded", "A call was made to HBA_LoadLibrary when a library was already loaded", "FCID passed into HBA_SendRNIDV2 violates access control rules"} : Amended ToSubclass] uint32 HBAStatus,[out] MS_SMHBA_PORTATTRIBUTES PortAttributes);
  void SM_GetPortAttributesByWWN([in] uint8 PortWWN[],[in] uint8 DomainPortWWN[],[in] uint32 PortSpecificAttributesMaxSize,[out,Description("HBA Status result for the query operation") : Amended ToSubclass,Values{"Operation was successful ", "Error ", "Function not supported.", "invalid handle ", "Bad argument ", "WWN not recognized ", "Index not recognized ", "Larger buffer required ", "Information has changed since the last call to HBA_RefreshInformation ", "SCSI Check Condition reported", "Adapter busy or reserved, retry may be effective", "Request timed out, retry may be effective", "Referenced HBA has been removed or deactivated", "The requested ELS was rejected by the local adapter", "The specified LUN is not provided by the specified adapter", "An incompatibility has been detected among the library and driver modules", "Multiple adapters have a matching WWN", "A persistent binding request included a bad local SCSI bus number", "A persistent binding request included a bad local SCSI target number", "A persistent binding request included a bad local SCSI logical unit number", "A persistent binding set request included a local SCSI ID that was already bound", "A persistent binding request included a bad or unlocatable FCP Target FCID", "A persistent binding request included a bad FCP Target Node WWN", "A persistent binding request included a bad FCP Target Port WWN", "A persistent binding request included an FCP Logical Unit Number not defined by the identified Target", "A persistent binding request included an undefined or otherwise in accessible Logical Unit Unique Identifier", "A persistent binding remove request included a binding which did not match a binding established by the specified port", "A SCSI command was requested to an Nx_Port that was not a SCSI Target Port", "A request was made concerning an unsupported FC-4 protocol", "A request was made to enable unimplemented capabilities for a port", "SCSI target is busy", "A call was made to HBA_FreeLibrary when no library was loaded", "A call was made to HBA_LoadLibrary when a library was already loaded", "FCID passed into HBA_SendRNIDV2 violates access control rules"} : Amended ToSubclass] uint32 HBAStatus,[out] MS_SMHBA_PORTATTRIBUTES PortAttributes);
  void SM_GetProtocolStatistics([in] uint32 PortIndex,[in] uint32 ProtocolType,[out,Description("HBA Status result for the query operation") : Amended ToSubclass,Values{"Operation was successful ", "Error ", "Function not supported.", "invalid handle ", "Bad argument ", "WWN not recognized ", "Index not recognized ", "Larger buffer required ", "Information has changed since the last call to HBA_RefreshInformation ", "SCSI Check Condition reported", "Adapter busy or reserved, retry may be effective", "Request timed out, retry may be effective", "Referenced HBA has been removed or deactivated", "The requested ELS was rejected by the local adapter", "The specified LUN is not provided by the specified adapter", "An incompatibility has been detected among the library and driver modules", "Multiple adapters have a matching WWN", "A persistent binding request included a bad local SCSI bus number", "A persistent binding request included a bad local SCSI target number", "A persistent binding request included a bad local SCSI logical unit number", "A persistent binding set request included a local SCSI ID that was already bound", "A persistent binding request included a bad or unlocatable FCP Target FCID", "A persistent binding request included a bad FCP Target Node WWN", "A persistent binding request included a bad FCP Target Port WWN", "A persistent binding request included an FCP Logical Unit Number not defined by the identified Target", "A persistent binding request included an undefined or otherwise in accessible Logical Unit Unique Identifier", "A persistent binding remove request included a binding which did not match a binding established by the specified port", "A SCSI command was requested to an Nx_Port that was not a SCSI Target Port", "A request was made concerning an unsupported FC-4 protocol", "A request was made to enable unimplemented capabilities for a port", "SCSI target is busy", "A call was made to HBA_FreeLibrary when no library was loaded", "A call was made to HBA_LoadLibrary when a library was already loaded", "FCID passed into HBA_SendRNIDV2 violates access control rules"} : Amended ToSubclass] uint32 HBAStatus,[out] MS_SMHBA_PROTOCOLSTATISTICS ProtocolStatistics);
  [Description("Contadores típicos SMHBA_SASPHYSTATISTICS (9 contadores) o MSFC_HBAPortStatistics (15 contadores)") : Amended ToSubclass] void SM_GetPhyStatistics([in] uint32 PortIndex,[in] uint32 PhyIndex,[in] uint32 InNumOfPhyCounters,[out,Description("Resultado del Estado de HBA para la operación de consulta") : Amended ToSubclass,Values{"La operación se realizó correctamente ", "Error ", "Función no admitida.", "Identificador no válido ", "Argumento incorrecto ", "WWN no reconocido ", "Índice no reconocido ", "Se requiere un búfer más grande ", "La información cambió desde la última llamada a HBA_RefreshInformation ", "Condición de comprobación de SCSI notificada", "Adaptador ocupado o reservado; inténtelo de nuevo", "Se agotó el tiempo de espera de la solicitud; inténtelo de nuevo", "Se quitó o desactivó un HBA al que se hace referencia", "El adaptador local rechazó el ELS solicitado", "El adaptador especificado no proporciona el LUN especificado", "Se detectó una incompatibilidad entre los módulos de controlador y la biblioteca", "Hay varios adaptadores con un WWN coincidente", "Una solicitud de enlace persistente incluía un número de bus SCSI local incorrecto", "Una solicitud de enlace persistente incluía un número de destino SCSI local incorrecto", "Una solicitud de enlace persistente incluía un número de unidad lógica SCSI local incorrecto", "Una solicitud de establecimiento de enlace persistente incluía un identificador de SCSI local ya enlazado", "Una solicitud de enlace persistente incluía un identificador de FC de destino de FCP incorrecto o que no se encuentra", "Una solicitud de enlace persistente incluía un WWN de nodo de destino de FCP incorrecto", "Una solicitud de enlace persistente incluía un WWN de puerto de destino de FCP incorrecto", "Una solicitud de enlace persistente incluía un número de unidad lógica de FCP no definido por el destino identificado", "Una solicitud de enlace persistente incluía un identificador único de unidad lógica no definido o inaccesible", "Una solicitud de eliminación de enlace persistente incluía un enlace que no coincidía con uno establecido por el puerto especificado", "Se solicitó un comando SCSI para un Nx_Port que no era un puerto de destino SCSI", "Se realizó una solicitud sobre un protocolo FC-4 no admitido", "Se realizó una solicitud para habilitar las capacidades no implementadas para un puerto", "El destino SCSI está ocupado", "Se llamó a HBA_FreeLibrary cuando no se cargó ninguna biblioteca", "Se llamó a HBA_LoadLibrary cuando ya había una biblioteca cargada", "El FCID pasado a HBA_SendRNIDV2 infringe las reglas de control de acceso"} : Amended ToSubclass] uint32 HBAStatus,[out] uint32 TotalNumOfPhyCounters,[out] uint32 OutNumOfPhyCounters,[out] sint64 PhyCounter[]);
  void SM_GetFCPhyAttributes([in] uint32 PortIndex,[in] uint32 PhyIndex,[out,Description("HBA Status result for the query operation") : Amended ToSubclass,Values{"Operation was successful ", "Error ", "Function not supported.", "invalid handle ", "Bad argument ", "WWN not recognized ", "Index not recognized ", "Larger buffer required ", "Information has changed since the last call to HBA_RefreshInformation ", "SCSI Check Condition reported", "Adapter busy or reserved, retry may be effective", "Request timed out, retry may be effective", "Referenced HBA has been removed or deactivated", "The requested ELS was rejected by the local adapter", "The specified LUN is not provided by the specified adapter", "An incompatibility has been detected among the library and driver modules", "Multiple adapters have a matching WWN", "A persistent binding request included a bad local SCSI bus number", "A persistent binding request included a bad local SCSI target number", "A persistent binding request included a bad local SCSI logical unit number", "A persistent binding set request included a local SCSI ID that was already bound", "A persistent binding request included a bad or unlocatable FCP Target FCID", "A persistent binding request included a bad FCP Target Node WWN", "A persistent binding request included a bad FCP Target Port WWN", "A persistent binding request included an FCP Logical Unit Number not defined by the identified Target", "A persistent binding request included an undefined or otherwise in accessible Logical Unit Unique Identifier", "A persistent binding remove request included a binding which did not match a binding established by the specified port", "A SCSI command was requested to an Nx_Port that was not a SCSI Target Port", "A request was made concerning an unsupported FC-4 protocol", "A request was made to enable unimplemented capabilities for a port", "SCSI target is busy", "A call was made to HBA_FreeLibrary when no library was loaded", "A call was made to HBA_LoadLibrary when a library was already loaded", "FCID passed into HBA_SendRNIDV2 violates access control rules"} : Amended ToSubclass] uint32 HBAStatus,[out] MS_SMHBA_FC_PHY PhyType);
  void SM_GetSASPhyAttributes([in] uint32 PortIndex,[in] uint32 PhyIndex,[out,Description("HBA Status result for the query operation") : Amended ToSubclass,Values{"Operation was successful ", "Error ", "Function not supported.", "invalid handle ", "Bad argument ", "WWN not recognized ", "Index not recognized ", "Larger buffer required ", "Information has changed since the last call to HBA_RefreshInformation ", "SCSI Check Condition reported", "Adapter busy or reserved, retry may be effective", "Request timed out, retry may be effective", "Referenced HBA has been removed or deactivated", "The requested ELS was rejected by the local adapter", "The specified LUN is not provided by the specified adapter", "An incompatibility has been detected among the library and driver modules", "Multiple adapters have a matching WWN", "A persistent binding request included a bad local SCSI bus number", "A persistent binding request included a bad local SCSI target number", "A persistent binding request included a bad local SCSI logical unit number", "A persistent binding set request included a local SCSI ID that was already bound", "A persistent binding request included a bad or unlocatable FCP Target FCID", "A persistent binding request included a bad FCP Target Node WWN", "A persistent binding request included a bad FCP Target Port WWN", "A persistent binding request included an FCP Logical Unit Number not defined by the identified Target", "A persistent binding request included an undefined or otherwise in accessible Logical Unit Unique Identifier", "A persistent binding remove request included a binding which did not match a binding established by the specified port", "A SCSI command was requested to an Nx_Port that was not a SCSI Target Port", "A request was made concerning an unsupported FC-4 protocol", "A request was made to enable unimplemented capabilities for a port", "SCSI target is busy", "A call was made to HBA_FreeLibrary when no library was loaded", "A call was made to HBA_LoadLibrary when a library was already loaded", "FCID passed into HBA_SendRNIDV2 violates access control rules"} : Amended ToSubclass] uint32 HBAStatus,[out] MS_SMHBA_SAS_PHY PhyType);
};

[AMENDMENT, LOCALE(0x0c0a)] 
class MS_SMHBA_BINDINGENTRY
{
  [Description("Formas de realizar un enlace persistente") : Amended ToSubclass] uint32 type;
  [Description("Resultado del Estado de HBA para la operación de consulta") : Amended ToSubclass,Values{"La operación se realizó correctamente ", "Error ", "Función no admitida.", "Identificador no válido ", "Argumento incorrecto ", "WWN no reconocido ", "Índice no reconocido ", "Se requiere un búfer más grande ", "La información cambió desde la última llamada a HBA_RefreshInformation ", "Condición de comprobación de SCSI notificada", "Adaptador ocupado o reservado; inténtelo de nuevo", "Se agotó el tiempo de espera de la solicitud; inténtelo de nuevo", "Se quitó o desactivó un HBA al que se hace referencia", "El adaptador local rechazó el ELS solicitado", "El adaptador especificado no proporciona el LUN especificado", "Se detectó una incompatibilidad entre los módulos de controlador y la biblioteca", "Hay varios adaptadores con un WWN coincidente", "Una solicitud de enlace persistente incluía un número de bus SCSI local incorrecto", "Una solicitud de enlace persistente incluía un número de destino SCSI local incorrecto", "Una solicitud de enlace persistente incluía un número de unidad lógica SCSI local incorrecto", "Una solicitud de establecimiento de enlace persistente incluía un identificador de SCSI local ya enlazado", "Una solicitud de enlace persistente incluía un identificador de FC de destino de FCP incorrecto o que no se encuentra", "Una solicitud de enlace persistente incluía un WWN de nodo de destino de FCP incorrecto", "Una solicitud de enlace persistente incluía un WWN de puerto de destino de FCP incorrecto", "Una solicitud de enlace persistente incluía un número de unidad lógica de FCP no definido por el destino identificado", "Una solicitud de enlace persistente incluía un identificador único de unidad lógica no definido o inaccesible", "Una solicitud de eliminación de enlace persistente incluía un enlace que no coincidía con uno establecido por el puerto especificado", "Se solicitó un comando SCSI para un Nx_Port que no era un puerto de destino SCSI", "Se realizó una solicitud sobre un protocolo FC-4 no admitido", "Se realizó una solicitud para habilitar las capacidades no implementadas para un puerto", "El destino SCSI está ocupado", "Se llamó a HBA_FreeLibrary cuando no se cargó ninguna biblioteca", "Se llamó a HBA_LoadLibrary cuando ya había una biblioteca cargada", "El FCID pasado a HBA_SendRNIDV2 infringe las reglas de control de acceso"} : Amended ToSubclass] uint32 Status;
};

[Description("") : Amended ToSubclass,AMENDMENT, LOCALE(0x0c0a)] 
class MS_SM_TargetInformationMethods
{
  void SM_GetTargetMapping([in] uint8 HbaPortWWN[],[in] uint8 DomainPortWWN[],[in] uint32 InEntryCount,[out,Description("HBA Status result for the query operation") : Amended ToSubclass,Values{"Operation was successful ", "Error ", "Function not supported.", "invalid handle ", "Bad argument ", "WWN not recognized ", "Index not recognized ", "Larger buffer required ", "Information has changed since the last call to HBA_RefreshInformation ", "SCSI Check Condition reported", "Adapter busy or reserved, retry may be effective", "Request timed out, retry may be effective", "Referenced HBA has been removed or deactivated", "The requested ELS was rejected by the local adapter", "The specified LUN is not provided by the specified adapter", "An incompatibility has been detected among the library and driver modules", "Multiple adapters have a matching WWN", "A persistent binding request included a bad local SCSI bus number", "A persistent binding request included a bad local SCSI target number", "A persistent binding request included a bad local SCSI logical unit number", "A persistent binding set request included a local SCSI ID that was already bound", "A persistent binding request included a bad or unlocatable FCP Target FCID", "A persistent binding request included a bad FCP Target Node WWN", "A persistent binding request included a bad FCP Target Port WWN", "A persistent binding request included an FCP Logical Unit Number not defined by the identified Target", "A persistent binding request included an undefined or otherwise in accessible Logical Unit Unique Identifier", "A persistent binding remove request included a binding which did not match a binding established by the specified port", "A SCSI command was requested to an Nx_Port that was not a SCSI Target Port", "A request was made concerning an unsupported FC-4 protocol", "A request was made to enable unimplemented capabilities for a port", "SCSI target is busy", "A call was made to HBA_FreeLibrary when no library was loaded", "A call was made to HBA_LoadLibrary when a library was already loaded", "FCID passed into HBA_SendRNIDV2 violates access control rules"} : Amended ToSubclass] uint32 HBAStatus,[out] uint32 TotalEntryCount,[out] uint32 OutEntryCount,[out] MS_SMHBA_SCSIENTRY Entry[]);
  void SM_GetBindingCapability([in] uint8 HbaPortWWN[],[in] uint8 DomainPortWWN[],[out,Description("HBA Status result for the query operation") : Amended ToSubclass,Values{"Operation was successful ", "Error ", "Function not supported.", "invalid handle ", "Bad argument ", "WWN not recognized ", "Index not recognized ", "Larger buffer required ", "Information has changed since the last call to HBA_RefreshInformation ", "SCSI Check Condition reported", "Adapter busy or reserved, retry may be effective", "Request timed out, retry may be effective", "Referenced HBA has been removed or deactivated", "The requested ELS was rejected by the local adapter", "The specified LUN is not provided by the specified adapter", "An incompatibility has been detected among the library and driver modules", "Multiple adapters have a matching WWN", "A persistent binding request included a bad local SCSI bus number", "A persistent binding request included a bad local SCSI target number", "A persistent binding request included a bad local SCSI logical unit number", "A persistent binding set request included a local SCSI ID that was already bound", "A persistent binding request included a bad or unlocatable FCP Target FCID", "A persistent binding request included a bad FCP Target Node WWN", "A persistent binding request included a bad FCP Target Port WWN", "A persistent binding request included an FCP Logical Unit Number not defined by the identified Target", "A persistent binding request included an undefined or otherwise in accessible Logical Unit Unique Identifier", "A persistent binding remove request included a binding which did not match a binding established by the specified port", "A SCSI command was requested to an Nx_Port that was not a SCSI Target Port", "A request was made concerning an unsupported FC-4 protocol", "A request was made to enable unimplemented capabilities for a port", "SCSI target is busy", "A call was made to HBA_FreeLibrary when no library was loaded", "A call was made to HBA_LoadLibrary when a library was already loaded", "FCID passed into HBA_SendRNIDV2 violates access control rules"} : Amended ToSubclass] uint32 HBAStatus,[out] uint32 Flags);
  void SM_GetBindingSupport([in] uint8 HbaPortWWN[],[in] uint8 DomainPortWWN[],[out,Description("HBA Status result for the query operation") : Amended ToSubclass,Values{"Operation was successful ", "Error ", "Function not supported.", "invalid handle ", "Bad argument ", "WWN not recognized ", "Index not recognized ", "Larger buffer required ", "Information has changed since the last call to HBA_RefreshInformation ", "SCSI Check Condition reported", "Adapter busy or reserved, retry may be effective", "Request timed out, retry may be effective", "Referenced HBA has been removed or deactivated", "The requested ELS was rejected by the local adapter", "The specified LUN is not provided by the specified adapter", "An incompatibility has been detected among the library and driver modules", "Multiple adapters have a matching WWN", "A persistent binding request included a bad local SCSI bus number", "A persistent binding request included a bad local SCSI target number", "A persistent binding request included a bad local SCSI logical unit number", "A persistent binding set request included a local SCSI ID that was already bound", "A persistent binding request included a bad or unlocatable FCP Target FCID", "A persistent binding request included a bad FCP Target Node WWN", "A persistent binding request included a bad FCP Target Port WWN", "A persistent binding request included an FCP Logical Unit Number not defined by the identified Target", "A persistent binding request included an undefined or otherwise in accessible Logical Unit Unique Identifier", "A persistent binding remove request included a binding which did not match a binding established by the specified port", "A SCSI command was requested to an Nx_Port that was not a SCSI Target Port", "A request was made concerning an unsupported FC-4 protocol", "A request was made to enable unimplemented capabilities for a port", "SCSI target is busy", "A call was made to HBA_FreeLibrary when no library was loaded", "A call was made to HBA_LoadLibrary when a library was already loaded", "FCID passed into HBA_SendRNIDV2 violates access control rules"} : Amended ToSubclass] uint32 HBAStatus,[out] uint32 Flags);
  void SM_SetBindingSupport([in] uint8 HbaPortWWN[],[in] uint8 DomainPortWWN[],[in] uint32 Flags,[out,Description("HBA Status result for the query operation") : Amended ToSubclass,Values{"Operation was successful ", "Error ", "Function not supported.", "invalid handle ", "Bad argument ", "WWN not recognized ", "Index not recognized ", "Larger buffer required ", "Information has changed since the last call to HBA_RefreshInformation ", "SCSI Check Condition reported", "Adapter busy or reserved, retry may be effective", "Request timed out, retry may be effective", "Referenced HBA has been removed or deactivated", "The requested ELS was rejected by the local adapter", "The specified LUN is not provided by the specified adapter", "An incompatibility has been detected among the library and driver modules", "Multiple adapters have a matching WWN", "A persistent binding request included a bad local SCSI bus number", "A persistent binding request included a bad local SCSI target number", "A persistent binding request included a bad local SCSI logical unit number", "A persistent binding set request included a local SCSI ID that was already bound", "A persistent binding request included a bad or unlocatable FCP Target FCID", "A persistent binding request included a bad FCP Target Node WWN", "A persistent binding request included a bad FCP Target Port WWN", "A persistent binding request included an FCP Logical Unit Number not defined by the identified Target", "A persistent binding request included an undefined or otherwise in accessible Logical Unit Unique Identifier", "A persistent binding remove request included a binding which did not match a binding established by the specified port", "A SCSI command was requested to an Nx_Port that was not a SCSI Target Port", "A request was made concerning an unsupported FC-4 protocol", "A request was made to enable unimplemented capabilities for a port", "SCSI target is busy", "A call was made to HBA_FreeLibrary when no library was loaded", "A call was made to HBA_LoadLibrary when a library was already loaded", "FCID passed into HBA_SendRNIDV2 violates access control rules"} : Amended ToSubclass] uint32 HBAStatus);
  void SM_GetPersistentBinding([in] uint8 HbaPortWWN[],[in] uint8 DomainPortWWN[],[in] uint32 InEntryCount,[out,Description("HBA Status result for the query operation") : Amended ToSubclass,Values{"Operation was successful ", "Error ", "Function not supported.", "invalid handle ", "Bad argument ", "WWN not recognized ", "Index not recognized ", "Larger buffer required ", "Information has changed since the last call to HBA_RefreshInformation ", "SCSI Check Condition reported", "Adapter busy or reserved, retry may be effective", "Request timed out, retry may be effective", "Referenced HBA has been removed or deactivated", "The requested ELS was rejected by the local adapter", "The specified LUN is not provided by the specified adapter", "An incompatibility has been detected among the library and driver modules", "Multiple adapters have a matching WWN", "A persistent binding request included a bad local SCSI bus number", "A persistent binding request included a bad local SCSI target number", "A persistent binding request included a bad local SCSI logical unit number", "A persistent binding set request included a local SCSI ID that was already bound", "A persistent binding request included a bad or unlocatable FCP Target FCID", "A persistent binding request included a bad FCP Target Node WWN", "A persistent binding request included a bad FCP Target Port WWN", "A persistent binding request included an FCP Logical Unit Number not defined by the identified Target", "A persistent binding request included an undefined or otherwise in accessible Logical Unit Unique Identifier", "A persistent binding remove request included a binding which did not match a binding established by the specified port", "A SCSI command was requested to an Nx_Port that was not a SCSI Target Port", "A request was made concerning an unsupported FC-4 protocol", "A request was made to enable unimplemented capabilities for a port", "SCSI target is busy", "A call was made to HBA_FreeLibrary when no library was loaded", "A call was made to HBA_LoadLibrary when a library was already loaded", "FCID passed into HBA_SendRNIDV2 violates access control rules"} : Amended ToSubclass] uint32 HBAStatus,[out] uint32 TotalEntryCount,[out] uint32 OutEntryCount,[out] MS_SMHBA_BINDINGENTRY Entry[]);
  void SM_SetPersistentBinding([in] uint8 HbaPortWWN[],[in] uint8 DomainPortWWN[],[in] uint32 InEntryCount,[in] MS_SMHBA_BINDINGENTRY Entry[],[out,Description("HBA Status result for the query operation") : Amended ToSubclass,Values{"Operation was successful ", "Error ", "Function not supported.", "invalid handle ", "Bad argument ", "WWN not recognized ", "Index not recognized ", "Larger buffer required ", "Information has changed since the last call to HBA_RefreshInformation ", "SCSI Check Condition reported", "Adapter busy or reserved, retry may be effective", "Request timed out, retry may be effective", "Referenced HBA has been removed or deactivated", "The requested ELS was rejected by the local adapter", "The specified LUN is not provided by the specified adapter", "An incompatibility has been detected among the library and driver modules", "Multiple adapters have a matching WWN", "A persistent binding request included a bad local SCSI bus number", "A persistent binding request included a bad local SCSI target number", "A persistent binding request included a bad local SCSI logical unit number", "A persistent binding set request included a local SCSI ID that was already bound", "A persistent binding request included a bad or unlocatable FCP Target FCID", "A persistent binding request included a bad FCP Target Node WWN", "A persistent binding request included a bad FCP Target Port WWN", "A persistent binding request included an FCP Logical Unit Number not defined by the identified Target", "A persistent binding request included an undefined or otherwise in accessible Logical Unit Unique Identifier", "A persistent binding remove request included a binding which did not match a binding established by the specified port", "A SCSI command was requested to an Nx_Port that was not a SCSI Target Port", "A request was made concerning an unsupported FC-4 protocol", "A request was made to enable unimplemented capabilities for a port", "SCSI target is busy", "A call was made to HBA_FreeLibrary when no library was loaded", "A call was made to HBA_LoadLibrary when a library was already loaded", "FCID passed into HBA_SendRNIDV2 violates access control rules"} : Amended ToSubclass] uint32 HBAStatus,[out] uint32 OutStatusCount,[out] uint32 EntryStatus[]);
  void SM_RemovePersistentBinding([in] uint8 HbaPortWWN[],[in] uint8 DomainPortWWN[],[in] uint32 EntryCount,[in] MS_SMHBA_BINDINGENTRY Entry[],[out,Description("HBA Status result for the query operation") : Amended ToSubclass,Values{"Operation was successful ", "Error ", "Function not supported.", "invalid handle ", "Bad argument ", "WWN not recognized ", "Index not recognized ", "Larger buffer required ", "Information has changed since the last call to HBA_RefreshInformation ", "SCSI Check Condition reported", "Adapter busy or reserved, retry may be effective", "Request timed out, retry may be effective", "Referenced HBA has been removed or deactivated", "The requested ELS was rejected by the local adapter", "The specified LUN is not provided by the specified adapter", "An incompatibility has been detected among the library and driver modules", "Multiple adapters have a matching WWN", "A persistent binding request included a bad local SCSI bus number", "A persistent binding request included a bad local SCSI target number", "A persistent binding request included a bad local SCSI logical unit number", "A persistent binding set request included a local SCSI ID that was already bound", "A persistent binding request included a bad or unlocatable FCP Target FCID", "A persistent binding request included a bad FCP Target Node WWN", "A persistent binding request included a bad FCP Target Port WWN", "A persistent binding request included an FCP Logical Unit Number not defined by the identified Target", "A persistent binding request included an undefined or otherwise in accessible Logical Unit Unique Identifier", "A persistent binding remove request included a binding which did not match a binding established by the specified port", "A SCSI command was requested to an Nx_Port that was not a SCSI Target Port", "A request was made concerning an unsupported FC-4 protocol", "A request was made to enable unimplemented capabilities for a port", "SCSI target is busy", "A call was made to HBA_FreeLibrary when no library was loaded", "A call was made to HBA_LoadLibrary when a library was already loaded", "FCID passed into HBA_SendRNIDV2 violates access control rules"} : Amended ToSubclass] uint32 HBAStatus);
  void SM_GetLUNStatistics([in] HBAScsiID Lunit,[out,Description("HBA Status result for the query operation") : Amended ToSubclass,Values{"Operation was successful ", "Error ", "Function not supported.", "invalid handle ", "Bad argument ", "WWN not recognized ", "Index not recognized ", "Larger buffer required ", "Information has changed since the last call to HBA_RefreshInformation ", "SCSI Check Condition reported", "Adapter busy or reserved, retry may be effective", "Request timed out, retry may be effective", "Referenced HBA has been removed or deactivated", "The requested ELS was rejected by the local adapter", "The specified LUN is not provided by the specified adapter", "An incompatibility has been detected among the library and driver modules", "Multiple adapters have a matching WWN", "A persistent binding request included a bad local SCSI bus number", "A persistent binding request included a bad local SCSI target number", "A persistent binding request included a bad local SCSI logical unit number", "A persistent binding set request included a local SCSI ID that was already bound", "A persistent binding request included a bad or unlocatable FCP Target FCID", "A persistent binding request included a bad FCP Target Node WWN", "A persistent binding request included a bad FCP Target Port WWN", "A persistent binding request included an FCP Logical Unit Number not defined by the identified Target", "A persistent binding request included an undefined or otherwise in accessible Logical Unit Unique Identifier", "A persistent binding remove request included a binding which did not match a binding established by the specified port", "A SCSI command was requested to an Nx_Port that was not a SCSI Target Port", "A request was made concerning an unsupported FC-4 protocol", "A request was made to enable unimplemented capabilities for a port", "SCSI target is busy", "A call was made to HBA_FreeLibrary when no library was loaded", "A call was made to HBA_LoadLibrary when a library was already loaded", "FCID passed into HBA_SendRNIDV2 violates access control rules"} : Amended ToSubclass] uint32 HBAStatus,[out] MS_SMHBA_PROTOCOLSTATISTICS ProtocolStatistics);
};

[Description("") : Amended ToSubclass,AMENDMENT, LOCALE(0x0c0a)] 
class MS_SM_ScsiInformationMethods
{
  void SM_ScsiInquiry([in] uint8 HbaPortWWN[],[in] uint8 DiscoveredPortWWN[],[in] uint8 DomainPortWWN[],[in] uint64 SmhbaLUN,[in] uint8 Cdb[],[in] uint32 InRespBufferMaxSize,[in] uint32 InSenseBufferMaxSize,[out,Description("HBA Status result for the query operation") : Amended ToSubclass,Values{"Operation was successful ", "Error ", "Function not supported.", "invalid handle ", "Bad argument ", "WWN not recognized ", "Index not recognized ", "Larger buffer required ", "Information has changed since the last call to HBA_RefreshInformation ", "SCSI Check Condition reported", "Adapter busy or reserved, retry may be effective", "Request timed out, retry may be effective", "Referenced HBA has been removed or deactivated", "The requested ELS was rejected by the local adapter", "The specified LUN is not provided by the specified adapter", "An incompatibility has been detected among the library and driver modules", "Multiple adapters have a matching WWN", "A persistent binding request included a bad local SCSI bus number", "A persistent binding request included a bad local SCSI target number", "A persistent binding request included a bad local SCSI logical unit number", "A persistent binding set request included a local SCSI ID that was already bound", "A persistent binding request included a bad or unlocatable FCP Target FCID", "A persistent binding request included a bad FCP Target Node WWN", "A persistent binding request included a bad FCP Target Port WWN", "A persistent binding request included an FCP Logical Unit Number not defined by the identified Target", "A persistent binding request included an undefined or otherwise in accessible Logical Unit Unique Identifier", "A persistent binding remove request included a binding which did not match a binding established by the specified port", "A SCSI command was requested to an Nx_Port that was not a SCSI Target Port", "A request was made concerning an unsupported FC-4 protocol", "A request was made to enable unimplemented capabilities for a port", "SCSI target is busy", "A call was made to HBA_FreeLibrary when no library was loaded", "A call was made to HBA_LoadLibrary when a library was already loaded", "FCID passed into HBA_SendRNIDV2 violates access control rules"} : Amended ToSubclass] uint32 HBAStatus,[out] uint8 ScsiStatus,[out] uint32 OutRespBufferSize,[out] uint32 OutSenseBufferSize,[out] uint8 RespBuffer[],[out] uint8 SenseBuffer[]);
  void SM_ScsiReportLuns([in] uint8 HbaPortWWN[],[in] uint8 DiscoveredPortWWN[],[in] uint8 DomainPortWWN[],[in] uint8 Cdb[],[in] uint32 InRespBufferMaxSize,[in] uint32 InSenseBufferMaxSize,[out,Description("HBA Status result for the query operation") : Amended ToSubclass,Values{"Operation was successful ", "Error ", "Function not supported.", "invalid handle ", "Bad argument ", "WWN not recognized ", "Index not recognized ", "Larger buffer required ", "Information has changed since the last call to HBA_RefreshInformation ", "SCSI Check Condition reported", "Adapter busy or reserved, retry may be effective", "Request timed out, retry may be effective", "Referenced HBA has been removed or deactivated", "The requested ELS was rejected by the local adapter", "The specified LUN is not provided by the specified adapter", "An incompatibility has been detected among the library and driver modules", "Multiple adapters have a matching WWN", "A persistent binding request included a bad local SCSI bus number", "A persistent binding request included a bad local SCSI target number", "A persistent binding request included a bad local SCSI logical unit number", "A persistent binding set request included a local SCSI ID that was already bound", "A persistent binding request included a bad or unlocatable FCP Target FCID", "A persistent binding request included a bad FCP Target Node WWN", "A persistent binding request included a bad FCP Target Port WWN", "A persistent binding request included an FCP Logical Unit Number not defined by the identified Target", "A persistent binding request included an undefined or otherwise in accessible Logical Unit Unique Identifier", "A persistent binding remove request included a binding which did not match a binding established by the specified port", "A SCSI command was requested to an Nx_Port that was not a SCSI Target Port", "A request was made concerning an unsupported FC-4 protocol", "A request was made to enable unimplemented capabilities for a port", "SCSI target is busy", "A call was made to HBA_FreeLibrary when no library was loaded", "A call was made to HBA_LoadLibrary when a library was already loaded", "FCID passed into HBA_SendRNIDV2 violates access control rules"} : Amended ToSubclass] uint32 HBAStatus,[out] uint8 ScsiStatus,[out] uint32 TotalRespBufferSize,[out] uint32 OutRespBufferSize,[out] uint32 OutSenseBufferSize,[out] uint8 RespBuffer[],[out] uint8 SenseBuffer[]);
  void SM_ScsiReadCapacity([in] uint8 HbaPortWWN[],[in] uint8 DiscoveredPortWWN[],[in] uint8 DomainPortWWN[],[in] uint64 SmhbaLUN,[in] uint8 Cdb[],[in] uint32 InRespBufferMaxSize,[in] uint32 InSenseBufferMaxSize,[out,Description("HBA Status result for the query operation") : Amended ToSubclass,Values{"Operation was successful ", "Error ", "Function not supported.", "invalid handle ", "Bad argument ", "WWN not recognized ", "Index not recognized ", "Larger buffer required ", "Information has changed since the last call to HBA_RefreshInformation ", "SCSI Check Condition reported", "Adapter busy or reserved, retry may be effective", "Request timed out, retry may be effective", "Referenced HBA has been removed or deactivated", "The requested ELS was rejected by the local adapter", "The specified LUN is not provided by the specified adapter", "An incompatibility has been detected among the library and driver modules", "Multiple adapters have a matching WWN", "A persistent binding request included a bad local SCSI bus number", "A persistent binding request included a bad local SCSI target number", "A persistent binding request included a bad local SCSI logical unit number", "A persistent binding set request included a local SCSI ID that was already bound", "A persistent binding request included a bad or unlocatable FCP Target FCID", "A persistent binding request included a bad FCP Target Node WWN", "A persistent binding request included a bad FCP Target Port WWN", "A persistent binding request included an FCP Logical Unit Number not defined by the identified Target", "A persistent binding request included an undefined or otherwise in accessible Logical Unit Unique Identifier", "A persistent binding remove request included a binding which did not match a binding established by the specified port", "A SCSI command was requested to an Nx_Port that was not a SCSI Target Port", "A request was made concerning an unsupported FC-4 protocol", "A request was made to enable unimplemented capabilities for a port", "SCSI target is busy", "A call was made to HBA_FreeLibrary when no library was loaded", "A call was made to HBA_LoadLibrary when a library was already loaded", "FCID passed into HBA_SendRNIDV2 violates access control rules"} : Amended ToSubclass] uint32 HBAStatus,[out] uint8 ScsiStatus,[out] uint32 OutRespBufferSize,[out] uint32 OutSenseBufferSize,[out] uint8 RespBuffer[],[out] uint8 SenseBuffer[]);
};

[Description("") : Amended ToSubclass,AMENDMENT, LOCALE(0x0c0a)] 
class MS_SM_FabricAndDomainManagementMethods
{
  void SM_SendTEST([in] uint8 HbaPortWWN[],[in] uint8 DestWWN[],[in] uint32 DestFCID,[in] uint32 ReqBufferSize,[in] uint8 ReqBuffer[],[out,Description("HBA Status result for the query operation") : Amended ToSubclass,Values{"Operation was successful ", "Error ", "Function not supported.", "invalid handle ", "Bad argument ", "WWN not recognized ", "Index not recognized ", "Larger buffer required ", "Information has changed since the last call to HBA_RefreshInformation ", "SCSI Check Condition reported", "Adapter busy or reserved, retry may be effective", "Request timed out, retry may be effective", "Referenced HBA has been removed or deactivated", "The requested ELS was rejected by the local adapter", "The specified LUN is not provided by the specified adapter", "An incompatibility has been detected among the library and driver modules", "Multiple adapters have a matching WWN", "A persistent binding request included a bad local SCSI bus number", "A persistent binding request included a bad local SCSI target number", "A persistent binding request included a bad local SCSI logical unit number", "A persistent binding set request included a local SCSI ID that was already bound", "A persistent binding request included a bad or unlocatable FCP Target FCID", "A persistent binding request included a bad FCP Target Node WWN", "A persistent binding request included a bad FCP Target Port WWN", "A persistent binding request included an FCP Logical Unit Number not defined by the identified Target", "A persistent binding request included an undefined or otherwise in accessible Logical Unit Unique Identifier", "A persistent binding remove request included a binding which did not match a binding established by the specified port", "A SCSI command was requested to an Nx_Port that was not a SCSI Target Port", "A request was made concerning an unsupported FC-4 protocol", "A request was made to enable unimplemented capabilities for a port", "SCSI target is busy", "A call was made to HBA_FreeLibrary when no library was loaded", "A call was made to HBA_LoadLibrary when a library was already loaded", "FCID passed into HBA_SendRNIDV2 violates access control rules"} : Amended ToSubclass] uint32 HBAStatus);
  void SM_SendECHO([in] uint8 HbaPortWWN[],[in] uint8 DestWWN[],[in] uint32 DestFCID,[in] uint32 InRespBufferMaxSize,[in] uint32 ReqBufferSize,[in] uint8 ReqBuffer[],[out,Description("HBA Status result for the query operation") : Amended ToSubclass,Values{"Operation was successful ", "Error ", "Function not supported.", "invalid handle ", "Bad argument ", "WWN not recognized ", "Index not recognized ", "Larger buffer required ", "Information has changed since the last call to HBA_RefreshInformation ", "SCSI Check Condition reported", "Adapter busy or reserved, retry may be effective", "Request timed out, retry may be effective", "Referenced HBA has been removed or deactivated", "The requested ELS was rejected by the local adapter", "The specified LUN is not provided by the specified adapter", "An incompatibility has been detected among the library and driver modules", "Multiple adapters have a matching WWN", "A persistent binding request included a bad local SCSI bus number", "A persistent binding request included a bad local SCSI target number", "A persistent binding request included a bad local SCSI logical unit number", "A persistent binding set request included a local SCSI ID that was already bound", "A persistent binding request included a bad or unlocatable FCP Target FCID", "A persistent binding request included a bad FCP Target Node WWN", "A persistent binding request included a bad FCP Target Port WWN", "A persistent binding request included an FCP Logical Unit Number not defined by the identified Target", "A persistent binding request included an undefined or otherwise in accessible Logical Unit Unique Identifier", "A persistent binding remove request included a binding which did not match a binding established by the specified port", "A SCSI command was requested to an Nx_Port that was not a SCSI Target Port", "A request was made concerning an unsupported FC-4 protocol", "A request was made to enable unimplemented capabilities for a port", "SCSI target is busy", "A call was made to HBA_FreeLibrary when no library was loaded", "A call was made to HBA_LoadLibrary when a library was already loaded", "FCID passed into HBA_SendRNIDV2 violates access control rules"} : Amended ToSubclass] uint32 HBAStatus,[out] uint32 OutRespBufferSize,[out] uint8 RespBuffer[]);
  void SM_SendSMPPassThru([in] uint8 HbaPortWWN[],[in] uint8 DestPortWWN[],[in] uint8 DomainPortWWN[],[in] uint32 InRespBufferMaxSize,[in] uint32 ReqBufferSize,[in] uint8 ReqBuffer[],[out,Description("HBA Status result for the query operation") : Amended ToSubclass,Values{"Operation was successful ", "Error ", "Function not supported.", "invalid handle ", "Bad argument ", "WWN not recognized ", "Index not recognized ", "Larger buffer required ", "Information has changed since the last call to HBA_RefreshInformation ", "SCSI Check Condition reported", "Adapter busy or reserved, retry may be effective", "Request timed out, retry may be effective", "Referenced HBA has been removed or deactivated", "The requested ELS was rejected by the local adapter", "The specified LUN is not provided by the specified adapter", "An incompatibility has been detected among the library and driver modules", "Multiple adapters have a matching WWN", "A persistent binding request included a bad local SCSI bus number", "A persistent binding request included a bad local SCSI target number", "A persistent binding request included a bad local SCSI logical unit number", "A persistent binding set request included a local SCSI ID that was already bound", "A persistent binding request included a bad or unlocatable FCP Target FCID", "A persistent binding request included a bad FCP Target Node WWN", "A persistent binding request included a bad FCP Target Port WWN", "A persistent binding request included an FCP Logical Unit Number not defined by the identified Target", "A persistent binding request included an undefined or otherwise in accessible Logical Unit Unique Identifier", "A persistent binding remove request included a binding which did not match a binding established by the specified port", "A SCSI command was requested to an Nx_Port that was not a SCSI Target Port", "A request was made concerning an unsupported FC-4 protocol", "A request was made to enable unimplemented capabilities for a port", "SCSI target is busy", "A call was made to HBA_FreeLibrary when no library was loaded", "A call was made to HBA_LoadLibrary when a library was already loaded", "FCID passed into HBA_SendRNIDV2 violates access control rules"} : Amended ToSubclass] uint32 HBAStatus,[out] uint32 TotalRespBufferSize,[out] uint32 OutRespBufferSize,[out] uint8 RespBuffer[]);
  void SM_SendCTPassThru([in] uint8 HbaPortWWN[],[in] uint32 InRespBufferMaxSize,[in] uint32 ReqBufferSize,[in] uint8 ReqBuffer[],[out,Description("HBA Status result for the query operation") : Amended ToSubclass,Values{"Operation was successful ", "Error ", "Function not supported.", "invalid handle ", "Bad argument ", "WWN not recognized ", "Index not recognized ", "Larger buffer required ", "Information has changed since the last call to HBA_RefreshInformation ", "SCSI Check Condition reported", "Adapter busy or reserved, retry may be effective", "Request timed out, retry may be effective", "Referenced HBA has been removed or deactivated", "The requested ELS was rejected by the local adapter", "The specified LUN is not provided by the specified adapter", "An incompatibility has been detected among the library and driver modules", "Multiple adapters have a matching WWN", "A persistent binding request included a bad local SCSI bus number", "A persistent binding request included a bad local SCSI target number", "A persistent binding request included a bad local SCSI logical unit number", "A persistent binding set request included a local SCSI ID that was already bound", "A persistent binding request included a bad or unlocatable FCP Target FCID", "A persistent binding request included a bad FCP Target Node WWN", "A persistent binding request included a bad FCP Target Port WWN", "A persistent binding request included an FCP Logical Unit Number not defined by the identified Target", "A persistent binding request included an undefined or otherwise in accessible Logical Unit Unique Identifier", "A persistent binding remove request included a binding which did not match a binding established by the specified port", "A SCSI command was requested to an Nx_Port that was not a SCSI Target Port", "A request was made concerning an unsupported FC-4 protocol", "A request was made to enable unimplemented capabilities for a port", "SCSI target is busy", "A call was made to HBA_FreeLibrary when no library was loaded", "A call was made to HBA_LoadLibrary when a library was already loaded", "FCID passed into HBA_SendRNIDV2 violates access control rules"} : Amended ToSubclass] uint32 HBAStatus,[out] uint32 TotalRespBufferSize,[out] uint32 OutRespBufferSize,[out] uint8 RespBuffer[]);
  void SM_GetRNIDMgmtInfo([out,Description("HBA Status result for the query operation") : Amended ToSubclass,Values{"Operation was successful ", "Error ", "Function not supported.", "invalid handle ", "Bad argument ", "WWN not recognized ", "Index not recognized ", "Larger buffer required ", "Information has changed since the last call to HBA_RefreshInformation ", "SCSI Check Condition reported", "Adapter busy or reserved, retry may be effective", "Request timed out, retry may be effective", "Referenced HBA has been removed or deactivated", "The requested ELS was rejected by the local adapter", "The specified LUN is not provided by the specified adapter", "An incompatibility has been detected among the library and driver modules", "Multiple adapters have a matching WWN", "A persistent binding request included a bad local SCSI bus number", "A persistent binding request included a bad local SCSI target number", "A persistent binding request included a bad local SCSI logical unit number", "A persistent binding set request included a local SCSI ID that was already bound", "A persistent binding request included a bad or unlocatable FCP Target FCID", "A persistent binding request included a bad FCP Target Node WWN", "A persistent binding request included a bad FCP Target Port WWN", "A persistent binding request included an FCP Logical Unit Number not defined by the identified Target", "A persistent binding request included an undefined or otherwise in accessible Logical Unit Unique Identifier", "A persistent binding remove request included a binding which did not match a binding established by the specified port", "A SCSI command was requested to an Nx_Port that was not a SCSI Target Port", "A request was made concerning an unsupported FC-4 protocol", "A request was made to enable unimplemented capabilities for a port", "SCSI target is busy", "A call was made to HBA_FreeLibrary when no library was loaded", "A call was made to HBA_LoadLibrary when a library was already loaded", "FCID passed into HBA_SendRNIDV2 violates access control rules"} : Amended ToSubclass] uint32 HBAStatus,[out] HBAFC3MgmtInfo MgmtInfo);
  void SM_SetRNIDMgmtInfo([in] HBAFC3MgmtInfo MgmtInfo,[out,Description("HBA Status result for the query operation") : Amended ToSubclass,Values{"Operation was successful ", "Error ", "Function not supported.", "invalid handle ", "Bad argument ", "WWN not recognized ", "Index not recognized ", "Larger buffer required ", "Information has changed since the last call to HBA_RefreshInformation ", "SCSI Check Condition reported", "Adapter busy or reserved, retry may be effective", "Request timed out, retry may be effective", "Referenced HBA has been removed or deactivated", "The requested ELS was rejected by the local adapter", "The specified LUN is not provided by the specified adapter", "An incompatibility has been detected among the library and driver modules", "Multiple adapters have a matching WWN", "A persistent binding request included a bad local SCSI bus number", "A persistent binding request included a bad local SCSI target number", "A persistent binding request included a bad local SCSI logical unit number", "A persistent binding set request included a local SCSI ID that was already bound", "A persistent binding request included a bad or unlocatable FCP Target FCID", "A persistent binding request included a bad FCP Target Node WWN", "A persistent binding request included a bad FCP Target Port WWN", "A persistent binding request included an FCP Logical Unit Number not defined by the identified Target", "A persistent binding request included an undefined or otherwise in accessible Logical Unit Unique Identifier", "A persistent binding remove request included a binding which did not match a binding established by the specified port", "A SCSI command was requested to an Nx_Port that was not a SCSI Target Port", "A request was made concerning an unsupported FC-4 protocol", "A request was made to enable unimplemented capabilities for a port", "SCSI target is busy", "A call was made to HBA_FreeLibrary when no library was loaded", "A call was made to HBA_LoadLibrary when a library was already loaded", "FCID passed into HBA_SendRNIDV2 violates access control rules"} : Amended ToSubclass] uint32 HBAStatus);
  void SM_SendRNID([in] uint8 HbaPortWWN[],[in] uint8 DestWWN[],[in] uint32 DestFCID,[in] uint32 NodeIdDataFormat,[in] uint32 InRespBufferMaxSize,[out,Description("HBA Status result for the query operation") : Amended ToSubclass,Values{"Operation was successful ", "Error ", "Function not supported.", "invalid handle ", "Bad argument ", "WWN not recognized ", "Index not recognized ", "Larger buffer required ", "Information has changed since the last call to HBA_RefreshInformation ", "SCSI Check Condition reported", "Adapter busy or reserved, retry may be effective", "Request timed out, retry may be effective", "Referenced HBA has been removed or deactivated", "The requested ELS was rejected by the local adapter", "The specified LUN is not provided by the specified adapter", "An incompatibility has been detected among the library and driver modules", "Multiple adapters have a matching WWN", "A persistent binding request included a bad local SCSI bus number", "A persistent binding request included a bad local SCSI target number", "A persistent binding request included a bad local SCSI logical unit number", "A persistent binding set request included a local SCSI ID that was already bound", "A persistent binding request included a bad or unlocatable FCP Target FCID", "A persistent binding request included a bad FCP Target Node WWN", "A persistent binding request included a bad FCP Target Port WWN", "A persistent binding request included an FCP Logical Unit Number not defined by the identified Target", "A persistent binding request included an undefined or otherwise in accessible Logical Unit Unique Identifier", "A persistent binding remove request included a binding which did not match a binding established by the specified port", "A SCSI command was requested to an Nx_Port that was not a SCSI Target Port", "A request was made concerning an unsupported FC-4 protocol", "A request was made to enable unimplemented capabilities for a port", "SCSI target is busy", "A call was made to HBA_FreeLibrary when no library was loaded", "A call was made to HBA_LoadLibrary when a library was already loaded", "FCID passed into HBA_SendRNIDV2 violates access control rules"} : Amended ToSubclass] uint32 HBAStatus,[out] uint32 TotalRespBufferSize,[out] uint32 OutRespBufferSize,[out] uint8 RespBuffer[]);
  void SM_SendRPL([in] uint8 HbaPortWWN[],[in] uint8 AgentWWN[],[in] uint32 AgentDomain,[in] uint32 PortIndex,[in] uint32 InRespBufferMaxSize,[out,Description("HBA Status result for the query operation") : Amended ToSubclass,Values{"Operation was successful ", "Error ", "Function not supported.", "invalid handle ", "Bad argument ", "WWN not recognized ", "Index not recognized ", "Larger buffer required ", "Information has changed since the last call to HBA_RefreshInformation ", "SCSI Check Condition reported", "Adapter busy or reserved, retry may be effective", "Request timed out, retry may be effective", "Referenced HBA has been removed or deactivated", "The requested ELS was rejected by the local adapter", "The specified LUN is not provided by the specified adapter", "An incompatibility has been detected among the library and driver modules", "Multiple adapters have a matching WWN", "A persistent binding request included a bad local SCSI bus number", "A persistent binding request included a bad local SCSI target number", "A persistent binding request included a bad local SCSI logical unit number", "A persistent binding set request included a local SCSI ID that was already bound", "A persistent binding request included a bad or unlocatable FCP Target FCID", "A persistent binding request included a bad FCP Target Node WWN", "A persistent binding request included a bad FCP Target Port WWN", "A persistent binding request included an FCP Logical Unit Number not defined by the identified Target", "A persistent binding request included an undefined or otherwise in accessible Logical Unit Unique Identifier", "A persistent binding remove request included a binding which did not match a binding established by the specified port", "A SCSI command was requested to an Nx_Port that was not a SCSI Target Port", "A request was made concerning an unsupported FC-4 protocol", "A request was made to enable unimplemented capabilities for a port", "SCSI target is busy", "A call was made to HBA_FreeLibrary when no library was loaded", "A call was made to HBA_LoadLibrary when a library was already loaded", "FCID passed into HBA_SendRNIDV2 violates access control rules"} : Amended ToSubclass] uint32 HBAStatus,[out] uint32 TotalRespBufferSize,[out] uint32 OutRespBufferSize,[out] uint8 RespBuffer[]);
  void SM_SendRPS([in] uint8 HbaPortWWN[],[in] uint8 AgentWWN[],[in] uint8 ObjectWWN[],[in] uint32 AgentDomain,[in] uint32 ObjectPortNumber,[in] uint32 InRespBufferMaxSize,[out,Description("HBA Status result for the query operation") : Amended ToSubclass,Values{"Operation was successful ", "Error ", "Function not supported.", "invalid handle ", "Bad argument ", "WWN not recognized ", "Index not recognized ", "Larger buffer required ", "Information has changed since the last call to HBA_RefreshInformation ", "SCSI Check Condition reported", "Adapter busy or reserved, retry may be effective", "Request timed out, retry may be effective", "Referenced HBA has been removed or deactivated", "The requested ELS was rejected by the local adapter", "The specified LUN is not provided by the specified adapter", "An incompatibility has been detected among the library and driver modules", "Multiple adapters have a matching WWN", "A persistent binding request included a bad local SCSI bus number", "A persistent binding request included a bad local SCSI target number", "A persistent binding request included a bad local SCSI logical unit number", "A persistent binding set request included a local SCSI ID that was already bound", "A persistent binding request included a bad or unlocatable FCP Target FCID", "A persistent binding request included a bad FCP Target Node WWN", "A persistent binding request included a bad FCP Target Port WWN", "A persistent binding request included an FCP Logical Unit Number not defined by the identified Target", "A persistent binding request included an undefined or otherwise in accessible Logical Unit Unique Identifier", "A persistent binding remove request included a binding which did not match a binding established by the specified port", "A SCSI command was requested to an Nx_Port that was not a SCSI Target Port", "A request was made concerning an unsupported FC-4 protocol", "A request was made to enable unimplemented capabilities for a port", "SCSI target is busy", "A call was made to HBA_FreeLibrary when no library was loaded", "A call was made to HBA_LoadLibrary when a library was already loaded", "FCID passed into HBA_SendRNIDV2 violates access control rules"} : Amended ToSubclass] uint32 HBAStatus,[out] uint32 TotalRespBufferSize,[out] uint32 OutRespBufferSize,[out] uint8 RespBuffer[]);
  void SM_SendSRL([in] uint8 HbaPortWWN[],[in] uint8 WWN[],[in] uint32 Domain,[in] uint32 InRespBufferMaxSize,[out,Description("HBA Status result for the query operation") : Amended ToSubclass,Values{"Operation was successful ", "Error ", "Function not supported.", "invalid handle ", "Bad argument ", "WWN not recognized ", "Index not recognized ", "Larger buffer required ", "Information has changed since the last call to HBA_RefreshInformation ", "SCSI Check Condition reported", "Adapter busy or reserved, retry may be effective", "Request timed out, retry may be effective", "Referenced HBA has been removed or deactivated", "The requested ELS was rejected by the local adapter", "The specified LUN is not provided by the specified adapter", "An incompatibility has been detected among the library and driver modules", "Multiple adapters have a matching WWN", "A persistent binding request included a bad local SCSI bus number", "A persistent binding request included a bad local SCSI target number", "A persistent binding request included a bad local SCSI logical unit number", "A persistent binding set request included a local SCSI ID that was already bound", "A persistent binding request included a bad or unlocatable FCP Target FCID", "A persistent binding request included a bad FCP Target Node WWN", "A persistent binding request included a bad FCP Target Port WWN", "A persistent binding request included an FCP Logical Unit Number not defined by the identified Target", "A persistent binding request included an undefined or otherwise in accessible Logical Unit Unique Identifier", "A persistent binding remove request included a binding which did not match a binding established by the specified port", "A SCSI command was requested to an Nx_Port that was not a SCSI Target Port", "A request was made concerning an unsupported FC-4 protocol", "A request was made to enable unimplemented capabilities for a port", "SCSI target is busy", "A call was made to HBA_FreeLibrary when no library was loaded", "A call was made to HBA_LoadLibrary when a library was already loaded", "FCID passed into HBA_SendRNIDV2 violates access control rules"} : Amended ToSubclass] uint32 HBAStatus,[out] uint32 TotalRespBufferSize,[out] uint32 OutRespBufferSize,[out] uint8 RespBuffer[]);
  void SM_SendLIRR([in] uint8 SourceWWN[],[in] uint8 DestWWN[],[in] uint8 Function,[in] uint8 Type,[in] uint32 InRespBufferMaxSize,[out,Description("HBA Status result for the query operation") : Amended ToSubclass,Values{"Operation was successful ", "Error ", "Function not supported.", "invalid handle ", "Bad argument ", "WWN not recognized ", "Index not recognized ", "Larger buffer required ", "Information has changed since the last call to HBA_RefreshInformation ", "SCSI Check Condition reported", "Adapter busy or reserved, retry may be effective", "Request timed out, retry may be effective", "Referenced HBA has been removed or deactivated", "The requested ELS was rejected by the local adapter", "The specified LUN is not provided by the specified adapter", "An incompatibility has been detected among the library and driver modules", "Multiple adapters have a matching WWN", "A persistent binding request included a bad local SCSI bus number", "A persistent binding request included a bad local SCSI target number", "A persistent binding request included a bad local SCSI logical unit number", "A persistent binding set request included a local SCSI ID that was already bound", "A persistent binding request included a bad or unlocatable FCP Target FCID", "A persistent binding request included a bad FCP Target Node WWN", "A persistent binding request included a bad FCP Target Port WWN", "A persistent binding request included an FCP Logical Unit Number not defined by the identified Target", "A persistent binding request included an undefined or otherwise in accessible Logical Unit Unique Identifier", "A persistent binding remove request included a binding which did not match a binding established by the specified port", "A SCSI command was requested to an Nx_Port that was not a SCSI Target Port", "A request was made concerning an unsupported FC-4 protocol", "A request was made to enable unimplemented capabilities for a port", "SCSI target is busy", "A call was made to HBA_FreeLibrary when no library was loaded", "A call was made to HBA_LoadLibrary when a library was already loaded", "FCID passed into HBA_SendRNIDV2 violates access control rules"} : Amended ToSubclass] uint32 HBAStatus,[out] uint32 TotalRespBufferSize,[out] uint32 OutRespBufferSize,[out] uint8 RespBuffer[]);
  void SM_SendRLS([in] uint8 HbaPortWWN[],[in] uint8 DestWWN[],[in] uint32 InRespBufferMaxSize,[out,Description("HBA Status result for the query operation") : Amended ToSubclass,Values{"Operation was successful ", "Error ", "Function not supported.", "invalid handle ", "Bad argument ", "WWN not recognized ", "Index not recognized ", "Larger buffer required ", "Information has changed since the last call to HBA_RefreshInformation ", "SCSI Check Condition reported", "Adapter busy or reserved, retry may be effective", "Request timed out, retry may be effective", "Referenced HBA has been removed or deactivated", "The requested ELS was rejected by the local adapter", "The specified LUN is not provided by the specified adapter", "An incompatibility has been detected among the library and driver modules", "Multiple adapters have a matching WWN", "A persistent binding request included a bad local SCSI bus number", "A persistent binding request included a bad local SCSI target number", "A persistent binding request included a bad local SCSI logical unit number", "A persistent binding set request included a local SCSI ID that was already bound", "A persistent binding request included a bad or unlocatable FCP Target FCID", "A persistent binding request included a bad FCP Target Node WWN", "A persistent binding request included a bad FCP Target Port WWN", "A persistent binding request included an FCP Logical Unit Number not defined by the identified Target", "A persistent binding request included an undefined or otherwise in accessible Logical Unit Unique Identifier", "A persistent binding remove request included a binding which did not match a binding established by the specified port", "A SCSI command was requested to an Nx_Port that was not a SCSI Target Port", "A request was made concerning an unsupported FC-4 protocol", "A request was made to enable unimplemented capabilities for a port", "SCSI target is busy", "A call was made to HBA_FreeLibrary when no library was loaded", "A call was made to HBA_LoadLibrary when a library was already loaded", "FCID passed into HBA_SendRNIDV2 violates access control rules"} : Amended ToSubclass] uint32 HBAStatus,[out] uint32 TotalRespBufferSize,[out] uint32 OutRespBufferSize,[out] uint8 RespBuffer[]);
};

[Description("Esta clase muestra eventos de adaptador HBA") : Amended ToSubclass,AMENDMENT, LOCALE(0x0c0a)] 
class MS_SM_AdapterEvent : WMIEvent
{
  [Description("Tipo de evento") : Amended ToSubclass] uint32 EventType;
  [Description("WWN de adaptador") : Amended ToSubclass] uint8 PortWWN[];
};

[Description("Esta clase muestra eventos de puertos HBA") : Amended ToSubclass,AMENDMENT, LOCALE(0x0c0a)] 
class MS_SM_PortEvent : WMIEvent
{
  [Description("Tipo de evento") : Amended ToSubclass,Values{"HBA_EVENT_ADAPTER_UNKNOWN", "HBA_EVENT_ADAPTER_ADD", "HBA_EVENT_ADAPTER_REMOVE", "HBA_EVENT_ADAPTER_CHANGE", "HBA_EVENT_PORT_UNKNOWN", "HBA_EVENT_PORT_OFFLINE", "HBA_EVENT_PORT_ONLINE", "HBA_EVENT_PORT_NEW_TARGETS", "HBA_EVENT_PORT_FABRIC", "HBA_EVENT_PORT_BROADCAST_CHANGE", "HBA_EVENT_PORT_BROADCAST_D24_0", "HBA_EVENT_PORT_BROADCAST_D27_4", "HBA_EVENT_PORT_BROADCAST_SES", "HBA_EVENT_PORT_BROADCAST_D01_4", "HBA_EVENT_PORT_BROADCAST_D04_7", "HBA_EVENT_PORT_BROADCAST_D16_7", "HBA_EVENT_PORT_BROADCAST_D29_7", "HBA_EVENT_PORT_ALL", "HBA_EVENT_PORT_STAT_THRESHOLD", "HBA_EVENT_PORT_STAT_GROWTH", "HBA_EVENT_PHY_STAT_THRESHOLD", "HBA_EVENT_PHY_STAT_GROWTH", "HBA_EVENT_TARGET_UNKNOWN", "HBA_EVENT_TARGET_OFFLINE", "HBA_EVENT_TARGET_ONLINE", "HBA_EVENT_TARGET_REMOVED", "HBA_EVENT_LINK_UNKNOWN", "HBA_EVENT_LINK_INCIDENT"} : Amended ToSubclass] uint32 EventType;
  [Description("Id. de puerto tejido") : Amended ToSubclass] uint32 FabricPortId;
  [Description("WWN de puerto") : Amended ToSubclass] uint8 PortWWN[];
};

[Description("Esta clase muestra eventos de destinos HBA") : Amended ToSubclass,AMENDMENT, LOCALE(0x0c0a)] 
class MS_SM_TargetEvent : WmiEvent
{
  [Description("Tipo de evento") : Amended ToSubclass,Values{"HBA_EVENT_ADAPTER_UNKNOWN", "HBA_EVENT_ADAPTER_ADD", "HBA_EVENT_ADAPTER_REMOVE", "HBA_EVENT_ADAPTER_CHANGE", "HBA_EVENT_PORT_UNKNOWN", "HBA_EVENT_PORT_OFFLINE", "HBA_EVENT_PORT_ONLINE", "HBA_EVENT_PORT_NEW_TARGETS", "HBA_EVENT_PORT_FABRIC", "HBA_EVENT_PORT_BROADCAST_CHANGE", "HBA_EVENT_PORT_BROADCAST_D24_0", "HBA_EVENT_PORT_BROADCAST_D27_4", "HBA_EVENT_PORT_BROADCAST_SES", "HBA_EVENT_PORT_BROADCAST_D01_4", "HBA_EVENT_PORT_BROADCAST_D04_7", "HBA_EVENT_PORT_BROADCAST_D16_7", "HBA_EVENT_PORT_BROADCAST_D29_7", "HBA_EVENT_PORT_ALL", "HBA_EVENT_PORT_STAT_THRESHOLD", "HBA_EVENT_PORT_STAT_GROWTH", "HBA_EVENT_PHY_STAT_THRESHOLD", "HBA_EVENT_PHY_STAT_GROWTH", "HBA_EVENT_TARGET_UNKNOWN", "HBA_EVENT_TARGET_OFFLINE", "HBA_EVENT_TARGET_ONLINE", "HBA_EVENT_TARGET_REMOVED", "HBA_EVENT_LINK_UNKNOWN", "HBA_EVENT_LINK_INCIDENT"} : Amended ToSubclass] uint32 EventType;
  [Description("WWN de puerto") : Amended ToSubclass] uint8 PortWWN[];
  [Description("Puerto WWN detectado") : Amended ToSubclass] uint8 DiscoveredPortWWN[];
  [Description("WWN de puerto de dominio") : Amended ToSubclass] uint8 DomainPortWWN[];
};

[Description("Esta clase define los umbrales de estadísticas de puerto que harán que se produzca un evento HBA_EVENT_PORT_STAT_THRESHOLD") : Amended ToSubclass,AMENDMENT, LOCALE(0x0c0a)] 
class MS_SM_EventControl
{
  void SM_AddTarget([in] uint8 HbaPortWWN[],[in] uint8 DiscoveredPortWWN[],[in] uint8 DomainPortWWN[],[in] uint32 AllTargets,[out,Description("HBA Status result for the query operation") : Amended ToSubclass,Values{"Operation was successful ", "Error ", "Function not supported.", "invalid handle ", "Bad argument ", "WWN not recognized ", "Index not recognized ", "Larger buffer required ", "Information has changed since the last call to HBA_RefreshInformation ", "SCSI Check Condition reported", "Adapter busy or reserved, retry may be effective", "Request timed out, retry may be effective", "Referenced HBA has been removed or deactivated", "The requested ELS was rejected by the local adapter", "The specified LUN is not provided by the specified adapter", "An incompatibility has been detected among the library and driver modules", "Multiple adapters have a matching WWN", "A persistent binding request included a bad local SCSI bus number", "A persistent binding request included a bad local SCSI target number", "A persistent binding request included a bad local SCSI logical unit number", "A persistent binding set request included a local SCSI ID that was already bound", "A persistent binding request included a bad or unlocatable FCP Target FCID", "A persistent binding request included a bad FCP Target Node WWN", "A persistent binding request included a bad FCP Target Port WWN", "A persistent binding request included an FCP Logical Unit Number not defined by the identified Target", "A persistent binding request included an undefined or otherwise in accessible Logical Unit Unique Identifier", "A persistent binding remove request included a binding which did not match a binding established by the specified port", "A SCSI command was requested to an Nx_Port that was not a SCSI Target Port", "A request was made concerning an unsupported FC-4 protocol", "A request was made to enable unimplemented capabilities for a port", "SCSI target is busy", "A call was made to HBA_FreeLibrary when no library was loaded", "A call was made to HBA_LoadLibrary when a library was already loaded", "FCID passed into HBA_SendRNIDV2 violates access control rules"} : Amended ToSubclass] uint32 HBAStatus);
  void SM_RemoveTarget([in] uint8 HbaPortWWN[],[in] uint8 DiscoveredPortWWN[],[in] uint8 DomainPortWWN[],[in] uint32 AllTargets,[out,Description("HBA Status result for the query operation") : Amended ToSubclass,Values{"Operation was successful ", "Error ", "Function not supported.", "invalid handle ", "Bad argument ", "WWN not recognized ", "Index not recognized ", "Larger buffer required ", "Information has changed since the last call to HBA_RefreshInformation ", "SCSI Check Condition reported", "Adapter busy or reserved, retry may be effective", "Request timed out, retry may be effective", "Referenced HBA has been removed or deactivated", "The requested ELS was rejected by the local adapter", "The specified LUN is not provided by the specified adapter", "An incompatibility has been detected among the library and driver modules", "Multiple adapters have a matching WWN", "A persistent binding request included a bad local SCSI bus number", "A persistent binding request included a bad local SCSI target number", "A persistent binding request included a bad local SCSI logical unit number", "A persistent binding set request included a local SCSI ID that was already bound", "A persistent binding request included a bad or unlocatable FCP Target FCID", "A persistent binding request included a bad FCP Target Node WWN", "A persistent binding request included a bad FCP Target Port WWN", "A persistent binding request included an FCP Logical Unit Number not defined by the identified Target", "A persistent binding request included an undefined or otherwise in accessible Logical Unit Unique Identifier", "A persistent binding remove request included a binding which did not match a binding established by the specified port", "A SCSI command was requested to an Nx_Port that was not a SCSI Target Port", "A request was made concerning an unsupported FC-4 protocol", "A request was made to enable unimplemented capabilities for a port", "SCSI target is busy", "A call was made to HBA_FreeLibrary when no library was loaded", "A call was made to HBA_LoadLibrary when a library was already loaded", "FCID passed into HBA_SendRNIDV2 violates access control rules"} : Amended ToSubclass] uint32 HBAStatus);
  void SM_AddPort([in] uint8 PortWWN[],[in,Values{"HBA_EVENT_ADAPTER_UNKNOWN", "HBA_EVENT_ADAPTER_ADD", "HBA_EVENT_ADAPTER_REMOVE", "HBA_EVENT_ADAPTER_CHANGE", "HBA_EVENT_PORT_UNKNOWN", "HBA_EVENT_PORT_OFFLINE", "HBA_EVENT_PORT_ONLINE", "HBA_EVENT_PORT_NEW_TARGETS", "HBA_EVENT_PORT_FABRIC", "HBA_EVENT_PORT_BROADCAST_CHANGE", "HBA_EVENT_PORT_BROADCAST_D24_0", "HBA_EVENT_PORT_BROADCAST_D27_4", "HBA_EVENT_PORT_BROADCAST_SES", "HBA_EVENT_PORT_BROADCAST_D01_4", "HBA_EVENT_PORT_BROADCAST_D04_7", "HBA_EVENT_PORT_BROADCAST_D16_7", "HBA_EVENT_PORT_BROADCAST_D29_7", "HBA_EVENT_PORT_ALL", "HBA_EVENT_PORT_STAT_THRESHOLD", "HBA_EVENT_PORT_STAT_GROWTH", "HBA_EVENT_PHY_STAT_THRESHOLD", "HBA_EVENT_PHY_STAT_GROWTH", "HBA_EVENT_TARGET_UNKNOWN", "HBA_EVENT_TARGET_OFFLINE", "HBA_EVENT_TARGET_ONLINE", "HBA_EVENT_TARGET_REMOVED", "HBA_EVENT_LINK_UNKNOWN", "HBA_EVENT_LINK_INCIDENT"} : Amended ToSubclass] uint32 EventType,[out,Description("HBA Status result for the query operation") : Amended ToSubclass,Values{"Operation was successful ", "Error ", "Function not supported.", "invalid handle ", "Bad argument ", "WWN not recognized ", "Index not recognized ", "Larger buffer required ", "Information has changed since the last call to HBA_RefreshInformation ", "SCSI Check Condition reported", "Adapter busy or reserved, retry may be effective", "Request timed out, retry may be effective", "Referenced HBA has been removed or deactivated", "The requested ELS was rejected by the local adapter", "The specified LUN is not provided by the specified adapter", "An incompatibility has been detected among the library and driver modules", "Multiple adapters have a matching WWN", "A persistent binding request included a bad local SCSI bus number", "A persistent binding request included a bad local SCSI target number", "A persistent binding request included a bad local SCSI logical unit number", "A persistent binding set request included a local SCSI ID that was already bound", "A persistent binding request included a bad or unlocatable FCP Target FCID", "A persistent binding request included a bad FCP Target Node WWN", "A persistent binding request included a bad FCP Target Port WWN", "A persistent binding request included an FCP Logical Unit Number not defined by the identified Target", "A persistent binding request included an undefined or otherwise in accessible Logical Unit Unique Identifier", "A persistent binding remove request included a binding which did not match a binding established by the specified port", "A SCSI command was requested to an Nx_Port that was not a SCSI Target Port", "A request was made concerning an unsupported FC-4 protocol", "A request was made to enable unimplemented capabilities for a port", "SCSI target is busy", "A call was made to HBA_FreeLibrary when no library was loaded", "A call was made to HBA_LoadLibrary when a library was already loaded", "FCID passed into HBA_SendRNIDV2 violates access control rules"} : Amended ToSubclass] uint32 HBAStatus);
  void SM_RemovePort([in] uint8 PortWWN[],[in,Values{"HBA_EVENT_ADAPTER_UNKNOWN", "HBA_EVENT_ADAPTER_ADD", "HBA_EVENT_ADAPTER_REMOVE", "HBA_EVENT_ADAPTER_CHANGE", "HBA_EVENT_PORT_UNKNOWN", "HBA_EVENT_PORT_OFFLINE", "HBA_EVENT_PORT_ONLINE", "HBA_EVENT_PORT_NEW_TARGETS", "HBA_EVENT_PORT_FABRIC", "HBA_EVENT_PORT_BROADCAST_CHANGE", "HBA_EVENT_PORT_BROADCAST_D24_0", "HBA_EVENT_PORT_BROADCAST_D27_4", "HBA_EVENT_PORT_BROADCAST_SES", "HBA_EVENT_PORT_BROADCAST_D01_4", "HBA_EVENT_PORT_BROADCAST_D04_7", "HBA_EVENT_PORT_BROADCAST_D16_7", "HBA_EVENT_PORT_BROADCAST_D29_7", "HBA_EVENT_PORT_ALL", "HBA_EVENT_PORT_STAT_THRESHOLD", "HBA_EVENT_PORT_STAT_GROWTH", "HBA_EVENT_PHY_STAT_THRESHOLD", "HBA_EVENT_PHY_STAT_GROWTH", "HBA_EVENT_TARGET_UNKNOWN", "HBA_EVENT_TARGET_OFFLINE", "HBA_EVENT_TARGET_ONLINE", "HBA_EVENT_TARGET_REMOVED", "HBA_EVENT_LINK_UNKNOWN", "HBA_EVENT_LINK_INCIDENT"} : Amended ToSubclass] uint32 EventType,[out,Description("HBA Status result for the query operation") : Amended ToSubclass,Values{"Operation was successful ", "Error ", "Function not supported.", "invalid handle ", "Bad argument ", "WWN not recognized ", "Index not recognized ", "Larger buffer required ", "Information has changed since the last call to HBA_RefreshInformation ", "SCSI Check Condition reported", "Adapter busy or reserved, retry may be effective", "Request timed out, retry may be effective", "Referenced HBA has been removed or deactivated", "The requested ELS was rejected by the local adapter", "The specified LUN is not provided by the specified adapter", "An incompatibility has been detected among the library and driver modules", "Multiple adapters have a matching WWN", "A persistent binding request included a bad local SCSI bus number", "A persistent binding request included a bad local SCSI target number", "A persistent binding request included a bad local SCSI logical unit number", "A persistent binding set request included a local SCSI ID that was already bound", "A persistent binding request included a bad or unlocatable FCP Target FCID", "A persistent binding request included a bad FCP Target Node WWN", "A persistent binding request included a bad FCP Target Port WWN", "A persistent binding request included an FCP Logical Unit Number not defined by the identified Target", "A persistent binding request included an undefined or otherwise in accessible Logical Unit Unique Identifier", "A persistent binding remove request included a binding which did not match a binding established by the specified port", "A SCSI command was requested to an Nx_Port that was not a SCSI Target Port", "A request was made concerning an unsupported FC-4 protocol", "A request was made to enable unimplemented capabilities for a port", "SCSI target is busy", "A call was made to HBA_FreeLibrary when no library was loaded", "A call was made to HBA_LoadLibrary when a library was already loaded", "FCID passed into HBA_SendRNIDV2 violates access control rules"} : Amended ToSubclass] uint32 HBAStatus);
  void SM_AddLink([out,Description("HBA Status result for the query operation") : Amended ToSubclass,Values{"Operation was successful ", "Error ", "Function not supported.", "invalid handle ", "Bad argument ", "WWN not recognized ", "Index not recognized ", "Larger buffer required ", "Information has changed since the last call to HBA_RefreshInformation ", "SCSI Check Condition reported", "Adapter busy or reserved, retry may be effective", "Request timed out, retry may be effective", "Referenced HBA has been removed or deactivated", "The requested ELS was rejected by the local adapter", "The specified LUN is not provided by the specified adapter", "An incompatibility has been detected among the library and driver modules", "Multiple adapters have a matching WWN", "A persistent binding request included a bad local SCSI bus number", "A persistent binding request included a bad local SCSI target number", "A persistent binding request included a bad local SCSI logical unit number", "A persistent binding set request included a local SCSI ID that was already bound", "A persistent binding request included a bad or unlocatable FCP Target FCID", "A persistent binding request included a bad FCP Target Node WWN", "A persistent binding request included a bad FCP Target Port WWN", "A persistent binding request included an FCP Logical Unit Number not defined by the identified Target", "A persistent binding request included an undefined or otherwise in accessible Logical Unit Unique Identifier", "A persistent binding remove request included a binding which did not match a binding established by the specified port", "A SCSI command was requested to an Nx_Port that was not a SCSI Target Port", "A request was made concerning an unsupported FC-4 protocol", "A request was made to enable unimplemented capabilities for a port", "SCSI target is busy", "A call was made to HBA_FreeLibrary when no library was loaded", "A call was made to HBA_LoadLibrary when a library was already loaded", "FCID passed into HBA_SendRNIDV2 violates access control rules"} : Amended ToSubclass] uint32 HBAStatus);
  void SM_RemoveLink([out,Description("HBA Status result for the query operation") : Amended ToSubclass,Values{"Operation was successful ", "Error ", "Function not supported.", "invalid handle ", "Bad argument ", "WWN not recognized ", "Index not recognized ", "Larger buffer required ", "Information has changed since the last call to HBA_RefreshInformation ", "SCSI Check Condition reported", "Adapter busy or reserved, retry may be effective", "Request timed out, retry may be effective", "Referenced HBA has been removed or deactivated", "The requested ELS was rejected by the local adapter", "The specified LUN is not provided by the specified adapter", "An incompatibility has been detected among the library and driver modules", "Multiple adapters have a matching WWN", "A persistent binding request included a bad local SCSI bus number", "A persistent binding request included a bad local SCSI target number", "A persistent binding request included a bad local SCSI logical unit number", "A persistent binding set request included a local SCSI ID that was already bound", "A persistent binding request included a bad or unlocatable FCP Target FCID", "A persistent binding request included a bad FCP Target Node WWN", "A persistent binding request included a bad FCP Target Port WWN", "A persistent binding request included an FCP Logical Unit Number not defined by the identified Target", "A persistent binding request included an undefined or otherwise in accessible Logical Unit Unique Identifier", "A persistent binding remove request included a binding which did not match a binding established by the specified port", "A SCSI command was requested to an Nx_Port that was not a SCSI Target Port", "A request was made concerning an unsupported FC-4 protocol", "A request was made to enable unimplemented capabilities for a port", "SCSI target is busy", "A call was made to HBA_FreeLibrary when no library was loaded", "A call was made to HBA_LoadLibrary when a library was already loaded", "FCID passed into HBA_SendRNIDV2 violates access control rules"} : Amended ToSubclass] uint32 HBAStatus);
};

[Description("") : Amended ToSubclass,AMENDMENT, LOCALE(0x0c0a)] 
class MSFC_TM
{
};